Matches in DBpedia 2015-04 for { <http://dbpedia.org/resource/Prussian_P_10> ?p ?o }
Showing triples 1 to 57 of
57
with 100 triples per page.
- Prussian_P_10 abstract "The Prussian state railways' Class P 10 were 2-8-2 "Mikado" type passenger-hauling steam locomotives built for hauling heavy express trains in the hilly and mountainous terrain of the Mittelgebirge. They were the last Prussian passenger train steam locomotives to be developed in Prussia before the state railways were merged into the Deutsche Reichsbahn (German Imperial Railway), who eventually designated them as DRG Class 39.The design by Borsig, under the supervision of chief engineer August Meister, was ready in 1919 but, due to material shortages, no locomotives were produced until 1922. They were three-cylinder locomotives, all cylinders driving the second coupled axle. Three sets of Walschaerts valve gear were used, the one for the inside cylinder being mainly located inside the frame, but driven from the same eccentric crank as the valve gear on the left-hand side; two eccentric rods of different lengths being attached to the same crank. The locomotives' heavy axle-load exceeded the 17 tonne standard specification of much of the German rail network, so they were limited to specific lines which were constructed to higher standards. A total of 260 of these locomotives were ultimately constructed and they worked primarily on the Main-Weser-Bahn between Frankfurt and Kassel, as well as the Eifel region, the Black Forest network until their replacement by Class 221 diesel locomotives, and the Gäubahn (Stuttgart–Singen). They were the most powerful of all the state railway passenger locomotives.The vehicles were originally equipped with Prussian 2'2' T 31,5 tenders. The Deutsche Bundesbahn fitted many of the surviving examples with Witte smoke deflectors and 2'2' T 34 tenders. The last three engines were stabled in Stuttgart and taken out of service in 1967.The DB Museum owns 39 230, which may be viewed currently at the German Steam Locomotive Museum.In the East German Deutsche Reichsbahn the Prussian P 10 was indispensable and was therefore included in their reconstruction programme. The 85 Rekoloks were grouped into DR Class 22.".
- Prussian_P_10 thumbnail 39_230_1.jpg?width=300.
- Prussian_P_10 wikiPageExternalLink index.php.
- Prussian_P_10 wikiPageID "3982357".
- Prussian_P_10 wikiPageRevisionID "639503416".
- Prussian_P_10 %C3%BCberhitzerfl%C3%A4che "77.2".
- Prussian_P_10 abbildung "392301".
- Prussian_P_10 anzahl "260".
- Prussian_P_10 anzahlheizrohre "138".
- Prussian_P_10 anzahlrauchrohre "34".
- Prussian_P_10 ausmusterung "1967".
- Prussian_P_10 bauart "1".
- Prussian_P_10 baujahre "1922".
- Prussian_P_10 baureihe "DRG Class 39".
- Prussian_P_10 baureihe "Prussian P 10".
- Prussian_P_10 dienstmasse "110.4".
- Prussian_P_10 farbe "0".
- Prussian_P_10 farbe "FFFFFF".
- Prussian_P_10 gattung "P 46.19".
- Prussian_P_10 gesamtradstand "11600.0".
- Prussian_P_10 h%C3%B6chstgeschwindigkeit "110.0".
- Prussian_P_10 hasPhotoCollection Prussian_P_10.
- Prussian_P_10 hersteller August_Borsig.
- Prussian_P_10 hintenlaufraddurchmesser "1100.0".
- Prussian_P_10 indizierteleistung "1620.0".
- Prussian_P_10 kesseldruck "14.0".
- Prussian_P_10 kolbenhub "660.0".
- Prussian_P_10 l%C3%A4nge%C3%BCberpuffer "22890.0".
- Prussian_P_10 leermasse "100.4".
- Prussian_P_10 name "39230".
- Prussian_P_10 radsatzfahrmasse "19.4".
- Prussian_P_10 reibungsmasse "75.7".
- Prussian_P_10 rohrheizfl%C3%A4che "122.3".
- Prussian_P_10 rostfl%C3%A4che "4.08".
- Prussian_P_10 tenderbauart "pr 2'2' T 31,5".
- Prussian_P_10 treibraddurchmesser "1750.0".
- Prussian_P_10 verdampfungsheizfl%C3%A4che "217.01".
- Prussian_P_10 vornelaufraddurchmesser "1000.0".
- Prussian_P_10 wasser "31.5".
- Prussian_P_10 zylinderanzahl "3".
- Prussian_P_10 zylinderdurchmesser "520.0".
- Prussian_P_10 subject Category:2-8-2_locomotives.
- Prussian_P_10 subject Category:Locomotives_of_Prussia.
- Prussian_P_10 subject Category:Railway_locomotives_introduced_in_1922.
- Prussian_P_10 subject Category:Standard_gauge_railway_locomotives.
- Prussian_P_10 comment "The Prussian state railways' Class P 10 were 2-8-2 "Mikado" type passenger-hauling steam locomotives built for hauling heavy express trains in the hilly and mountainous terrain of the Mittelgebirge.".
- Prussian_P_10 label "DR-Baureihe 39".
- Prussian_P_10 label "Prussian P 10".
- Prussian_P_10 label "Pt1".
- Prussian_P_10 sameAs DR-Baureihe_39.
- Prussian_P_10 sameAs Pt1.
- Prussian_P_10 sameAs m.0b57v2.
- Prussian_P_10 sameAs Q882458.
- Prussian_P_10 sameAs Q882458.
- Prussian_P_10 wasDerivedFrom Prussian_P_10?oldid=639503416.
- Prussian_P_10 depiction 39_230_1.jpg.
- Prussian_P_10 isPrimaryTopicOf Prussian_P_10.