Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q447440> ?p ?o }
Showing triples 1 to 46 of
46
with 100 triples per page.
- Q447440 subject Q8236658.
- Q447440 abstract "Aluminium–lithium alloys (Al-Li) are a series of alloys of aluminium and lithium, often also including copper and zirconium. Since lithium is the least dense elemental metal these alloys are significantly less dense than aluminium. Commercial Al–Li alloys contain up to 2.45% by weight of lithium.Alloying with lithium reduces structural mass by three effects:Displacement—a lithium atom is lighter than an aluminium atom; each lithium atom then displaces one aluminium atom from the crystal lattice while maintaining the lattice structure. Every 1% by weight of lithium added to aluminium reduces the density of the resulting alloy by 3% and increases the stiffness by 5%. This effect works up to the solubility limit of lithium in aluminium, which is 4.2%.Strain hardening—Introducing another type of atom into the crystal strains the lattice, which helps block dislocations. The resulting material is thus stronger, which allows less of it to be used.Precipitation hardening—When properly aged, lithium forms a metastable Al3Li phase (δ') with a coherent crystal structure. These precipitates strengthen the metal by impeding dislocation motion during deformation. The precipitates are not stable however and care must be taken to prevent overaging with the formation of the stable AlLi (β) phase. This also produces precipitate free zones (PFZs) typically at grain boundaries and can reduce the corrosion resistance of the alloy.The crystal structure for Al3Li and Al–Li, while based on the FCC crystal system, are very different. Al3Li shows almost the same size lattice structure as pure aluminium except lithium atoms are present in the corners of the unit cell. The Al3Li structure is known as the AuCu3, L12, or Pm3m and has a lattice parameter of 4.01 Å. The Al–Li structure is known as the NaTl, B32, or Fd3m structure which is made of both lithium and aluminium assuming diamond structures and has a lattice parameter of 6.37 Å. The interatomic spacing for AlLi (3.19 Å) is smaller than either pure lithium or aluminium.Al–Li alloys are primarily of interest to the aerospace industry due to the weight advantage they provide. They are currently used in a few commercial jetliner airframes, the fuel and oxidizer tanks in the SpaceX Falcon 9 launch vehicle, and the AgustaWestland EH101 helicopter.The third and final version of the US Space Shuttle's external tank was principally made of Al–Li. In addition, Al–Li alloys are also used on both the Atlas V and Delta IV EELV rockets, and before its cancellation were to be used by NASA for Constellation program, primarily, on its Ares I and Ares V rockets, as well as the Orion spacecraft.Al-Li alloys are generally joined by friction stir welding. Some Al–Li alloys, such as Weldalite 049, can be welded conventionally; however, this property comes at the price of density; Weldalite 049 has about the same density as 2024 aluminium and 5% higher elastic modulus.Key world producers of Aluminium-lithium alloy products are Alcoa, Constellium, Kamensk-Uralsky Metallurgical Works.".
- Q447440 wikiPageExternalLink b32.html.
- Q447440 wikiPageExternalLink l1_2.html.
- Q447440 wikiPageWikiLink Q1038.
- Q447440 wikiPageWikiLink Q1061044.
- Q447440 wikiPageWikiLink Q11344.
- Q447440 wikiPageWikiLink Q1341791.
- Q447440 wikiPageWikiLink Q135325.
- Q447440 wikiPageWikiLink Q137056.
- Q447440 wikiPageWikiLink Q1501203.
- Q447440 wikiPageWikiLink Q170731.
- Q447440 wikiPageWikiLink Q1766751.
- Q447440 wikiPageWikiLink Q192005.
- Q447440 wikiPageWikiLink Q193701.
- Q447440 wikiPageWikiLink Q2068127.
- Q447440 wikiPageWikiLink Q211727.
- Q447440 wikiPageWikiLink Q2180288.
- Q447440 wikiPageWikiLink Q222946.
- Q447440 wikiPageWikiLink Q23625.
- Q447440 wikiPageWikiLink Q249091.
- Q447440 wikiPageWikiLink Q2876213.
- Q447440 wikiPageWikiLink Q29539.
- Q447440 wikiPageWikiLink Q2995071.
- Q447440 wikiPageWikiLink Q34486.
- Q447440 wikiPageWikiLink Q37756.
- Q447440 wikiPageWikiLink Q392348.
- Q447440 wikiPageWikiLink Q398881.
- Q447440 wikiPageWikiLink Q4120025.
- Q447440 wikiPageWikiLink Q4211318.
- Q447440 wikiPageWikiLink Q447725.
- Q447440 wikiPageWikiLink Q473227.
- Q447440 wikiPageWikiLink Q48806.
- Q447440 wikiPageWikiLink Q49543.
- Q447440 wikiPageWikiLink Q568.
- Q447440 wikiPageWikiLink Q569057.
- Q447440 wikiPageWikiLink Q622839.
- Q447440 wikiPageWikiLink Q625641.
- Q447440 wikiPageWikiLink Q663.
- Q447440 wikiPageWikiLink Q737571.
- Q447440 wikiPageWikiLink Q779974.
- Q447440 wikiPageWikiLink Q8236658.
- Q447440 wikiPageWikiLink Q895901.
- Q447440 wikiPageWikiLink Q900515.
- Q447440 comment "Aluminium–lithium alloys (Al-Li) are a series of alloys of aluminium and lithium, often also including copper and zirconium. Since lithium is the least dense elemental metal these alloys are significantly less dense than aluminium.".
- Q447440 label "Aluminium-lithium alloy".