Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q1416598> ?p ?o }
Showing triples 1 to 48 of
48
with 100 triples per page.
- Q1416598 subject Q7461465.
- Q1416598 abstract "The PROM-1 is a Yugoslavian manufactured bounding type of anti-personnel mine. It consists of a cylindrical body with a pronged fuze inserted into the top of the mine. It is broadly similar in operation to the German S-mine. The mine is triggered by the tilting of the prongs situated on top of the mine. This is caused by either direct pressure on the prongs or by tension on a tripwire attached to them. Tilting the prongs allows three striker retaining balls to escape. This releases the spring-loaded striker, which is flipped downwards into the percussion cap and fires the three gram propellant charge. The explosion of the propellant charge forces the upper half of the mine body out of the ground and up into the air, shearing off several brass screws and leaving the base plug of the mine behind in the ground. The mine's body is tethered to its base by a short length of wire, which unwinds behind it as it rises. When the mine reaches a height of approximately 65 centimetres the wire is pulled. This jerks the detonator assembly downwards into the striker. The detonator fires, triggering the main explosive charge, which shatters the internally grooved body into a large number of high-velocity steel fragments, which spray in all directions. Because the time taken from triggering the mine to detonation is so short (typically one second), there is no time to take cover from the blast.As with all bounding mines the PROM-1 is lethal at relatively long distances. It is capable of projecting dangerous fragments to range of 100 metres or more, with a potentially lethal range of around 50 metres. This mine will almost certainly kill or seriously injure anyone caught within 30 metres of the blast. As with any bounding mine, wearing standard kevlar body armour offers no guarantee of safety: the large number of fragments produced by a PROM-1 will wound the unprotected limbs, face and eyes of its victim(s). The PROM-1 can be particularly hard to spot in undergrowth because, apart from the prongs, most of it is buried underground and therefore cannot be seen. Although this mine contains lots of steel (thereby making it easy to detect with a mine-detector) the act of sweeping the detection head over the ground can easily strike the prongs (or connected tripwire) and detonate the mine. In any case, PROM-1s in a minefield may be surrounded by various types of minimum metal antipersonnel blast mines (e.g. the VS-50) which further hinders the clearance process.The PROM-1 is difficult to render safe because its fuze becomes unstable after being exposed to weather for several years. Most deminers therefore recommend that this mine is destroyed in situ by detonating an explosive charge next to it.Usually (though not always) trip-wires measuring around 20 feet (6 meters) in length are fitted to this mine in order to increase its activation area. When tracking trip-wires back to their source, deminers must keep in mind that other landmines may have been planted along its length. It is all too easy to concentrate on following a trip-wire back to its source, forgetting that there could be PMA-3, PMN or similar blast mines lying buried underneath.The mine has been found in Angola, Bosnia, Chile, Croatia, Eritrea, Iraq, Kosovo, Mozambique and Namibia.".
- Q1416598 thumbnail PROM-1_bounding_landmine.jpg?width=300.
- Q1416598 wikiPageExternalLink prom1.htm.
- Q1416598 wikiPageExternalLink yugoapm.php.
- Q1416598 wikiPageExternalLink minesPROM.htm.
- Q1416598 wikiPageExternalLink w0004529.shtml.
- Q1416598 wikiPageWikiLink Q1029.
- Q1416598 wikiPageWikiLink Q1030.
- Q1416598 wikiPageWikiLink Q1088842.
- Q1416598 wikiPageWikiLink Q1148188.
- Q1416598 wikiPageWikiLink Q1159902.
- Q1416598 wikiPageWikiLink Q1202430.
- Q1416598 wikiPageWikiLink Q1246.
- Q1416598 wikiPageWikiLink Q1401322.
- Q1416598 wikiPageWikiLink Q1412977.
- Q1416598 wikiPageWikiLink Q170167.
- Q1416598 wikiPageWikiLink Q1721001.
- Q1416598 wikiPageWikiLink Q178795.
- Q1416598 wikiPageWikiLink Q183.
- Q1416598 wikiPageWikiLink Q184753.
- Q1416598 wikiPageWikiLink Q1849288.
- Q1416598 wikiPageWikiLink Q1860419.
- Q1416598 wikiPageWikiLink Q207344.
- Q1416598 wikiPageWikiLink Q216681.
- Q1416598 wikiPageWikiLink Q224.
- Q1416598 wikiPageWikiLink Q225.
- Q1416598 wikiPageWikiLink Q298.
- Q1416598 wikiPageWikiLink Q301906.
- Q1416598 wikiPageWikiLink Q36704.
- Q1416598 wikiPageWikiLink Q3778724.
- Q1416598 wikiPageWikiLink Q4007062.
- Q1416598 wikiPageWikiLink Q430024.
- Q1416598 wikiPageWikiLink Q485027.
- Q1416598 wikiPageWikiLink Q4994847.
- Q1416598 wikiPageWikiLink Q570224.
- Q1416598 wikiPageWikiLink Q614853.
- Q1416598 wikiPageWikiLink Q6865474.
- Q1416598 wikiPageWikiLink Q7461465.
- Q1416598 wikiPageWikiLink Q786054.
- Q1416598 wikiPageWikiLink Q796.
- Q1416598 wikiPageWikiLink Q898998.
- Q1416598 wikiPageWikiLink Q916.
- Q1416598 wikiPageWikiLink Q977508.
- Q1416598 wikiPageWikiLink Q986.
- Q1416598 comment "The PROM-1 is a Yugoslavian manufactured bounding type of anti-personnel mine. It consists of a cylindrical body with a pronged fuze inserted into the top of the mine. It is broadly similar in operation to the German S-mine. The mine is triggered by the tilting of the prongs situated on top of the mine. This is caused by either direct pressure on the prongs or by tension on a tripwire attached to them. Tilting the prongs allows three striker retaining balls to escape.".
- Q1416598 label "PROM-1".
- Q1416598 depiction PROM-1_bounding_landmine.jpg.