Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q1143184> ?p ?o }
Showing triples 1 to 17 of
17
with 100 triples per page.
- Q1143184 subject Q21168617.
- Q1143184 subject Q8622193.
- Q1143184 abstract "A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts.They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values. It is common to have two sets for imperial units (typically measured in thousandths of an inch) and metric (typically measured in hundredths of a millimetre) measurements.A similar device with wires of specific diameter instead of flat blades is used to set the gap in spark plugs to the correct size; this is done by increasing or decreasing the gap until the gauge of the correct size just fits inside the gap.The lengths of steel are sometimes called leaves or blades, although they have no sharp edge.".
- Q1143184 thumbnail Feeler_gauge.jpg?width=300.
- Q1143184 wikiPageWikiLink Q11023.
- Q1143184 wikiPageWikiLink Q1165799.
- Q1143184 wikiPageWikiLink Q174789.
- Q1143184 wikiPageWikiLink Q193340.
- Q1143184 wikiPageWikiLink Q2098499.
- Q1143184 wikiPageWikiLink Q21168617.
- Q1143184 wikiPageWikiLink Q232405.
- Q1143184 wikiPageWikiLink Q39546.
- Q1143184 wikiPageWikiLink Q641227.
- Q1143184 wikiPageWikiLink Q8622193.
- Q1143184 comment "A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts.They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values.".
- Q1143184 label "Feeler gauge".
- Q1143184 depiction Feeler_gauge.jpg.