Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Pentalobular_screw_thread> ?p ?o }
Showing triples 1 to 43 of
43
with 100 triples per page.
- Pentalobular_screw_thread abstract "A pentalobular screw thread is a form of self-forming thread used for screws. Self-forming screws are used in ductile materials, such as aluminium and plastics.Self-tapping screws are widely used for driving into sheet metal or plastics and forming their own thread. They may be either self-drilling, forming their own hole through unbroken material, or fitted into a pre-pierced hole. Self-drilling screws have some ability to cut a thread, as for a tap. Others work not by cutting, but rather by roll-forming the thread, pushing excess material out of the way by plastic deformation. This is one reason why ductile host materials, rather than brittle, are needed.To form a close-fitting thread that will not be loose afterwards, roll-forming requires a lobed tool rather than a constant diameter cylindrical tool. This is particularly the case when the tool and the fastener are the same, such as for a screw. A lobed or polygonal form allows residual compressive stresses from the forming parts of the thread to be relieved in the undercut clearance between the lobes.This lobular thread has other advantages too. It allows the screw to be turned with lower torque, which also increases the 'strip-to-drive ratio' between the torques needed to drive the screw in or to damagingly strip the threads out. The proportions of the lobular thread can also change over the length of the screw, so that the tip of the screw can use greater lobulation to form the thread more aggressively and also provide a centring effect.In conjunction with a thread profile with sharp arrises, a three-lobed thread of this form is the basis of the well-known Taptite screws.The optimum number of lobes is five. Their number should be prime, to avoid the usual harmonic effects between lobes. As is already widely recognised with tapered reamers, five has better stability than three in imperfectly circular holes. More lobes than this, such as seven, would reduce the spacing for clearance between the lobes. A patent has been applied for about a thread with such an optimised pentalobular form.Such thread forms are not a new innovation. A patent for machinery to roll-form the threads of the screws was granted in 1975.".
- Pentalobular_screw_thread thumbnail Pentalobular_screwthread.png?width=300.
- Pentalobular_screw_thread wikiPageID "30548890".
- Pentalobular_screw_thread wikiPageLength "4299".
- Pentalobular_screw_thread wikiPageOutDegree "22".
- Pentalobular_screw_thread wikiPageRevisionID "681122841".
- Pentalobular_screw_thread wikiPageWikiLink Aluminium.
- Pentalobular_screw_thread wikiPageWikiLink Apple_Inc..
- Pentalobular_screw_thread wikiPageWikiLink Category:Screws.
- Pentalobular_screw_thread wikiPageWikiLink Category:Threaded_fasteners.
- Pentalobular_screw_thread wikiPageWikiLink Category:Threading_(manufacturing).
- Pentalobular_screw_thread wikiPageWikiLink Deformation_(engineering).
- Pentalobular_screw_thread wikiPageWikiLink Ductility.
- Pentalobular_screw_thread wikiPageWikiLink List_of_screw_drives.
- Pentalobular_screw_thread wikiPageWikiLink Pentalobe_screw.
- Pentalobular_screw_thread wikiPageWikiLink Plastic.
- Pentalobular_screw_thread wikiPageWikiLink Prime_number.
- Pentalobular_screw_thread wikiPageWikiLink Reamer.
- Pentalobular_screw_thread wikiPageWikiLink Screw.
- Pentalobular_screw_thread wikiPageWikiLink Self-tapping_screw.
- Pentalobular_screw_thread wikiPageWikiLink Sheet_metal.
- Pentalobular_screw_thread wikiPageWikiLink Tamper_resistance.
- Pentalobular_screw_thread wikiPageWikiLink Tap_and_die.
- Pentalobular_screw_thread wikiPageWikiLink Thread_profile.
- Pentalobular_screw_thread wikiPageWikiLink Threading_(manufacturing).
- Pentalobular_screw_thread wikiPageWikiLink File:Pentalobular_screwthread.png.
- Pentalobular_screw_thread wikiPageWikiLinkText "Pentalobular screw thread".
- Pentalobular_screw_thread wikiPageUsesTemplate Template:Colorbull.
- Pentalobular_screw_thread wikiPageUsesTemplate Template:Distinguish2.
- Pentalobular_screw_thread wikiPageUsesTemplate Template:More.
- Pentalobular_screw_thread wikiPageUsesTemplate Template:Reflist.
- Pentalobular_screw_thread subject Category:Screws.
- Pentalobular_screw_thread subject Category:Threaded_fasteners.
- Pentalobular_screw_thread subject Category:Threading_(manufacturing).
- Pentalobular_screw_thread hypernym Form.
- Pentalobular_screw_thread type Thing.
- Pentalobular_screw_thread comment "A pentalobular screw thread is a form of self-forming thread used for screws. Self-forming screws are used in ductile materials, such as aluminium and plastics.Self-tapping screws are widely used for driving into sheet metal or plastics and forming their own thread. They may be either self-drilling, forming their own hole through unbroken material, or fitted into a pre-pierced hole. Self-drilling screws have some ability to cut a thread, as for a tap.".
- Pentalobular_screw_thread label "Pentalobular screw thread".
- Pentalobular_screw_thread differentFrom Pentalobe_screw.
- Pentalobular_screw_thread sameAs m.012r5rvf.
- Pentalobular_screw_thread wasDerivedFrom Pentalobular_screw_thread?oldid=681122841.
- Pentalobular_screw_thread depiction Pentalobular_screwthread.png.
- Pentalobular_screw_thread isPrimaryTopicOf Pentalobular_screw_thread.