Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Offshore_Patrol_Cutter> ?p ?o }
Showing triples 1 to 46 of
46
with 100 triples per page.
- Offshore_Patrol_Cutter abstract "The United States Coast Guard (USCG) Offshore Patrol Cutter was one design among several new cutter designs developed as part of the Integrated Deepwater System Program.The cutter was originally proposed to include two rear-launching ramps, each capable of launching and retrieving a RHIB (rigid-hull inflatable boat), without first stopping.Unlike smaller cutters, like the Marine Protector, the Offshore Patrol Cutter and the National Security Cutter will be able to launch and retrieve both the Short Range Prosecutor and the larger Long Range Interceptor. The RHIBs will be used for intercepting suspect vessels, or for rescuing swimmers. Both RHIB types are propelled by diesel powered water jets.In 2010 and 2011 some commentators speculated that the entire program was vulnerable to cancellation on budgetary grounds, because of the long delay in finalizing a preliminary design.A bill passed by the United States Congress on November 15, 2011, imposed conditions on the Coast Guard's capital expenditures, that revolved around the design of the Offshore Patrol Cutter.By December 2011 plans for the cutter started to become more concrete.Plans to include a stern launching ramp, as on the National Security Cutters and the Fast Response Cutters, had been eliminated on budgetary grounds.In February 2014, the USCG announced that Bollinger Shipyards, Eastern Shipbuilding and General Dynamics Bath Iron Works had been awarded design contracts for the OPC. The Government Accountability Office denied contract appeals by VT Halter Marine and Ingalls Shipbuilding.".
- Offshore_Patrol_Cutter thumbnail Offshore_patrol_cutter.jpg?width=300.
- Offshore_Patrol_Cutter wikiPageExternalLink MATAGORDA.mpg.
- Offshore_Patrol_Cutter wikiPageID "13049272".
- Offshore_Patrol_Cutter wikiPageLength "6894".
- Offshore_Patrol_Cutter wikiPageOutDegree "16".
- Offshore_Patrol_Cutter wikiPageRevisionID "676590576".
- Offshore_Patrol_Cutter wikiPageWikiLink Category:Patrol_vessels_of_the_United_States.
- Offshore_Patrol_Cutter wikiPageWikiLink Category:United_States_Coast_Guard.
- Offshore_Patrol_Cutter wikiPageWikiLink Government_Accountability_Office.
- Offshore_Patrol_Cutter wikiPageWikiLink Integrated_Deepwater_System_Program.
- Offshore_Patrol_Cutter wikiPageWikiLink Long_Range_Interceptor.
- Offshore_Patrol_Cutter wikiPageWikiLink Marine_Protector-class_coastal_patrol_boat.
- Offshore_Patrol_Cutter wikiPageWikiLink National_Security_Cutter.
- Offshore_Patrol_Cutter wikiPageWikiLink Rigid-hulled_inflatable_boat.
- Offshore_Patrol_Cutter wikiPageWikiLink Sentinel-class_cutter.
- Offshore_Patrol_Cutter wikiPageWikiLink Short_Range_Prosecutor.
- Offshore_Patrol_Cutter wikiPageWikiLink Stern_launching_ramp.
- Offshore_Patrol_Cutter wikiPageWikiLink United_States_Coast_Guard.
- Offshore_Patrol_Cutter wikiPageWikiLink United_States_Coast_Guard_Cutter.
- Offshore_Patrol_Cutter wikiPageWikiLink United_States_Congress.
- Offshore_Patrol_Cutter wikiPageWikiLink File:Offshore_patrol_cutter.jpg.
- Offshore_Patrol_Cutter wikiPageWikiLinkText "Offshore Patrol Cutter (OPC)".
- Offshore_Patrol_Cutter wikiPageWikiLinkText "Offshore Patrol Cutter".
- Offshore_Patrol_Cutter wikiPageUsesTemplate Template:Dead_link.
- Offshore_Patrol_Cutter wikiPageUsesTemplate Template:US-mil-ship-stub.
- Offshore_Patrol_Cutter wikiPageUsesTemplate Template:USCG-stub.
- Offshore_Patrol_Cutter subject Category:Patrol_vessels_of_the_United_States.
- Offshore_Patrol_Cutter subject Category:United_States_Coast_Guard.
- Offshore_Patrol_Cutter hypernym Design.
- Offshore_Patrol_Cutter type Organisation.
- Offshore_Patrol_Cutter type Ship.
- Offshore_Patrol_Cutter type Agency.
- Offshore_Patrol_Cutter type Guard.
- Offshore_Patrol_Cutter type Organisation.
- Offshore_Patrol_Cutter type Service.
- Offshore_Patrol_Cutter type Ship.
- Offshore_Patrol_Cutter type Vessel.
- Offshore_Patrol_Cutter comment "The United States Coast Guard (USCG) Offshore Patrol Cutter was one design among several new cutter designs developed as part of the Integrated Deepwater System Program.The cutter was originally proposed to include two rear-launching ramps, each capable of launching and retrieving a RHIB (rigid-hull inflatable boat), without first stopping.Unlike smaller cutters, like the Marine Protector, the Offshore Patrol Cutter and the National Security Cutter will be able to launch and retrieve both the Short Range Prosecutor and the larger Long Range Interceptor. ".
- Offshore_Patrol_Cutter label "Offshore Patrol Cutter".
- Offshore_Patrol_Cutter sameAs Q7079676.
- Offshore_Patrol_Cutter sameAs m.02z4lwd.
- Offshore_Patrol_Cutter sameAs Q7079676.
- Offshore_Patrol_Cutter wasDerivedFrom Offshore_Patrol_Cutter?oldid=676590576.
- Offshore_Patrol_Cutter depiction Offshore_patrol_cutter.jpg.
- Offshore_Patrol_Cutter isPrimaryTopicOf Offshore_Patrol_Cutter.
