Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Nikko_TRM-800> ?p ?o }
Showing triples 1 to 36 of
36
with 100 triples per page.
- Nikko_TRM-800 abstract "The TRM-800 was a solid state integrated stereo amplifier made in Japan, using NEC power transistors, by Nikko. Beautifully housed in a wooden walnut-finished cabinet, was introduced in 1975, the same year as the Marantz 2235. It was a 2 channel amp; however; it had three sets of speaker connections; those powered selected by buttons. At 8 ohms, the amp could put out 65 Watts per channel RMS (90 Watts per channel RMS at 4 ohms). Unlike many amps of this time, however; the TRM-800 was stable at lower impedances than 8 ohms; down to four ohms. The TRM-800's frequency response ranges 10Hz to 40.000 Hz ±1 dB with T.H.D. less than 0.1% at rated output.Its preamplifier and main amplifier were separable for multi-channel amplifier systems. The amp has internal circuit breakers which prevent it from clipping or overheating. Its power consumption is 250 watts. For equalization it has only a bass and a treble knob; however the frequency of these are selectable; between 250 and 500 Hertz for the bass, and between 2.5 and 5 kHz for the treble. It also has a high, low, and a subsonic filter.".
- Nikko_TRM-800 thumbnail Nikko_TRM-800_amp_&_Realistic_STA-240_receiver.jpg?width=300.
- Nikko_TRM-800 wikiPageID "24504685".
- Nikko_TRM-800 wikiPageLength "1750".
- Nikko_TRM-800 wikiPageOutDegree "16".
- Nikko_TRM-800 wikiPageRevisionID "696170667".
- Nikko_TRM-800 wikiPageWikiLink Amplifier.
- Nikko_TRM-800 wikiPageWikiLink Category:Audio_amplifiers.
- Nikko_TRM-800 wikiPageWikiLink Circuit_breaker.
- Nikko_TRM-800 wikiPageWikiLink Clipping_(audio).
- Nikko_TRM-800 wikiPageWikiLink Electric_energy_consumption.
- Nikko_TRM-800 wikiPageWikiLink Electrical_impedance.
- Nikko_TRM-800 wikiPageWikiLink Equalization_(audio).
- Nikko_TRM-800 wikiPageWikiLink Infrasound.
- Nikko_TRM-800 wikiPageWikiLink Marantz_2235.
- Nikko_TRM-800 wikiPageWikiLink C.
- Nikko_TRM-800 wikiPageWikiLink Ohm.
- Nikko_TRM-800 wikiPageWikiLink Thermal_shock.
- Nikko_TRM-800 wikiPageWikiLink File:Amp_back.jpg.
- Nikko_TRM-800 wikiPageWikiLink File:Capacitor.jpg.
- Nikko_TRM-800 wikiPageWikiLink File:Nikko_TRM-800_amp_&_Realistic_STA-240_receiver.jpg.
- Nikko_TRM-800 wikiPageWikiLink File:Power_transistor_on_Nikko_TRM-800_audio_amp.jpg.
- Nikko_TRM-800 wikiPageWikiLinkText "Nikko TRM-800".
- Nikko_TRM-800 wikiPageUsesTemplate Template:Notability.
- Nikko_TRM-800 wikiPageUsesTemplate Template:Reflist.
- Nikko_TRM-800 subject Category:Audio_amplifiers.
- Nikko_TRM-800 hypernym State.
- Nikko_TRM-800 type PopulatedPlace.
- Nikko_TRM-800 comment "The TRM-800 was a solid state integrated stereo amplifier made in Japan, using NEC power transistors, by Nikko. Beautifully housed in a wooden walnut-finished cabinet, was introduced in 1975, the same year as the Marantz 2235. It was a 2 channel amp; however; it had three sets of speaker connections; those powered selected by buttons. At 8 ohms, the amp could put out 65 Watts per channel RMS (90 Watts per channel RMS at 4 ohms).".
- Nikko_TRM-800 label "Nikko TRM-800".
- Nikko_TRM-800 sameAs Q7035306.
- Nikko_TRM-800 sameAs m.080jxwn.
- Nikko_TRM-800 sameAs Q7035306.
- Nikko_TRM-800 wasDerivedFrom Nikko_TRM-800?oldid=696170667.
- Nikko_TRM-800 depiction Nikko_TRM-800_amp_&_Realistic_STA-240_receiver.jpg.
- Nikko_TRM-800 isPrimaryTopicOf Nikko_TRM-800.