Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Link_Quality_Report> ?p ?o }
Showing triples 1 to 25 of
25
with 100 triples per page.
- Link_Quality_Report abstract "The Link Quality Report (LQR) protocol is a part of the Point-to-Point Protocol (PPP), which allows two computers to connect to each other. LQR allows peers at either end of the PPP link to assess the state and quality of the PPP link.LQR only transmits counts of packets sent, received, and rejected with errors. It does not report on signal noise or attenuation.In order to produce Link Quality Reports, a PPP peer has to implement Link Quality Monitoring. Link Quality Monitoring consists of maintaining a number of counters. These counters include: Packets Transmitted Packets received Octets (or bytes) transmitted Octets received Number of LQRs transmitted Number of LQRs received Number of Octets received without error.The use of LQRs are negotiated when the PPP link is first established. Any peer that wants to receive LQR packets signals this by sending a PPP configuration Option with the following data: Type - always 4 Length - always 8 Quality Protocol - 0xC025 for Link Quality Reports Reporting period - the maximum time between LQR packets, in hundredths of seconds. The remote peer may send them more often. If set to zero, then the remote peer should send an LQR whenever it receives an LQR from the other peer.An LQR is one packet containing the counters above, as well as: a Magic Number that is used to detect looping conditions the last transmitted count of LQRs, packets and Octets transmitted number of packets discarded Number of packets found to have errors.In addition, the receiving peer will add the following fields to the LQR packet when it arrives: The number of LQRs that have been received. The number of Packets that have been received the number of received packets discarded The number of received packets found to have errors the number of received Octets.These numbers come from the MIB database that the PPP receive logic maintains. They are saved for use in the next LQR packet that the peer sends.".
- Link_Quality_Report wikiPageExternalLink rfc1333.txt.
- Link_Quality_Report wikiPageExternalLink rfc1989.txt.
- Link_Quality_Report wikiPageID "21837508".
- Link_Quality_Report wikiPageLength "2870".
- Link_Quality_Report wikiPageOutDegree "6".
- Link_Quality_Report wikiPageRevisionID "480055034".
- Link_Quality_Report wikiPageWikiLink Attenuation.
- Link_Quality_Report wikiPageWikiLink Category:Logical_link_control.
- Link_Quality_Report wikiPageWikiLink Management_information_base.
- Link_Quality_Report wikiPageWikiLink Network_packet.
- Link_Quality_Report wikiPageWikiLink Noise_(electronics).
- Link_Quality_Report wikiPageWikiLink Point-to-Point_Protocol.
- Link_Quality_Report wikiPageWikiLinkText "Link Quality Report".
- Link_Quality_Report wikiPageUsesTemplate Template:Reflist.
- Link_Quality_Report subject Category:Logical_link_control.
- Link_Quality_Report hypernym Part.
- Link_Quality_Report type Protocol.
- Link_Quality_Report comment "The Link Quality Report (LQR) protocol is a part of the Point-to-Point Protocol (PPP), which allows two computers to connect to each other. LQR allows peers at either end of the PPP link to assess the state and quality of the PPP link.LQR only transmits counts of packets sent, received, and rejected with errors. It does not report on signal noise or attenuation.In order to produce Link Quality Reports, a PPP peer has to implement Link Quality Monitoring.".
- Link_Quality_Report label "Link Quality Report".
- Link_Quality_Report sameAs Q6554277.
- Link_Quality_Report sameAs m.05p9d5q.
- Link_Quality_Report sameAs Q6554277.
- Link_Quality_Report wasDerivedFrom Link_Quality_Report?oldid=480055034.
- Link_Quality_Report isPrimaryTopicOf Link_Quality_Report.