Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Lathe_dog> ?p ?o }
Showing triples 1 to 33 of
33
with 100 triples per page.
- Lathe_dog abstract "A lathe dog, also known as a lathe carrier, is a device that clamps around the workpiece and allows the rotary motion of the machine's spindle to be transmitted to the workpiece.A carrier is most often used when turning between centers on a lathe, but it may be used on dividing heads or any similar situation. It is used in conjunction with a drive plate and drive pins: the plate is mounted directly on the machine spindle (as with a chuck) and the drive pin is attached to the plate. In use the carrier and workpiece are inserted between centers and the leg of the carrier rests against the drive pin.Carriers may be of the straight leg or bent leg type. The straight leg requires the drive pin, the bent leg fits into a slot machined into the drive plate. The bent leg type is considered safer as there are (slightly) fewer protruding parts to cause accidents.Spindle speeds are reduced when working with carriers, due to the unbalanced nature of the setup. Care must also be taken by the operator when using carriers, as it is easy to get snagged on one.".
- Lathe_dog thumbnail LatheDrivePlate-carriers.jpg?width=300.
- Lathe_dog wikiPageID "2549971".
- Lathe_dog wikiPageLength "1550".
- Lathe_dog wikiPageOutDegree "10".
- Lathe_dog wikiPageRevisionID "593864497".
- Lathe_dog wikiPageWikiLink Category:Lathes.
- Lathe_dog wikiPageWikiLink Chuck_(engineering).
- Lathe_dog wikiPageWikiLink File:Lathedog.jpg.
- Lathe_dog wikiPageWikiLink Lathe.
- Lathe_dog wikiPageWikiLink Lathe_center.
- Lathe_dog wikiPageWikiLink Lathe_faceplate.
- Lathe_dog wikiPageWikiLink Mandrel.
- Lathe_dog wikiPageWikiLink Revolutions_per_minute.
- Lathe_dog wikiPageWikiLink Rotation_around_a_fixed_axis.
- Lathe_dog wikiPageWikiLink File:LatheDrivePlate-carriers.jpg.
- Lathe_dog wikiPageWikiLinkText "Lathe dog".
- Lathe_dog wikiPageWikiLinkText "lathe dog".
- Lathe_dog wikiPageUsesTemplate Template:Metalworking_navbox.
- Lathe_dog wikiPageUsesTemplate Template:Unreferenced.
- Lathe_dog subject Category:Lathes.
- Lathe_dog hypernym Device.
- Lathe_dog type Device.
- Lathe_dog type Machine.
- Lathe_dog type Tool.
- Lathe_dog comment "A lathe dog, also known as a lathe carrier, is a device that clamps around the workpiece and allows the rotary motion of the machine's spindle to be transmitted to the workpiece.A carrier is most often used when turning between centers on a lathe, but it may be used on dividing heads or any similar situation. It is used in conjunction with a drive plate and drive pins: the plate is mounted directly on the machine spindle (as with a chuck) and the drive pin is attached to the plate.".
- Lathe_dog label "Lathe dog".
- Lathe_dog sameAs Q6495889.
- Lathe_dog sameAs m.07mgh2.
- Lathe_dog sameAs Q6495889.
- Lathe_dog wasDerivedFrom Lathe_dog?oldid=593864497.
- Lathe_dog depiction LatheDrivePlate-carriers.jpg.
- Lathe_dog isPrimaryTopicOf Lathe_dog.