Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Italian_Bakelite_Anti-tank_mines> ?p ?o }
Showing triples 1 to 30 of
30
with 100 triples per page.
- Italian_Bakelite_Anti-tank_mines abstract "The Bakelite anti-tank mine type I and type II were Italian anti-tank mines produced during the Second World War. As the name suggests, the mines used Bakelite cases and used relatively few metal components, making them difficult to detect with mine detectors of the era. It was primarily used to deter pursuit when withdrawing from an area.The Type I mine had a cylindrical case with a domed upper pressure plate that is held above the main case of the mine by the spring-loaded central fuze well. A strip of canvas around the circumference seals the gap between the pressure plate and the main body of the mine. The Type II uses a smaller pressure plate, that does not cover the entire top surface of the mine, giving the center of the mine a raised appearance. In every other detail, the mines are identical. Both mines were armed and disarmed using a brass arming key.The mine is triggered by downward force of greater than 110 pounds on the pressure plate, which pushes the upper fuze assembly downwards. This compresses nine coil springs and shears two brass shear pins. As the pressure continues, striker retaining balls line up with cavities that allow them to escape, releasing the striker into the percussion cap detonator, this triggers the booster charge, followed by the main charge.".
- Italian_Bakelite_Anti-tank_mines wikiPageID "10116604".
- Italian_Bakelite_Anti-tank_mines wikiPageLength "1863".
- Italian_Bakelite_Anti-tank_mines wikiPageOutDegree "12".
- Italian_Bakelite_Anti-tank_mines wikiPageRevisionID "544730789".
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Anti-tank_mine.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Bakelite.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Category:Anti-tank_mines_of_Italy.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Demining.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Force.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Italy.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Minimum_metal_mine.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Newton_(unit).
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Pound_(force).
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink Pound_(mass).
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLink World_War_II.
- Italian_Bakelite_Anti-tank_mines wikiPageWikiLinkText "Italian Bakelite Anti-tank mines".
- Italian_Bakelite_Anti-tank_mines subject Category:Anti-tank_mines_of_Italy.
- Italian_Bakelite_Anti-tank_mines hypernym Mines.
- Italian_Bakelite_Anti-tank_mines type Mine.
- Italian_Bakelite_Anti-tank_mines type Place.
- Italian_Bakelite_Anti-tank_mines type Mine.
- Italian_Bakelite_Anti-tank_mines comment "The Bakelite anti-tank mine type I and type II were Italian anti-tank mines produced during the Second World War. As the name suggests, the mines used Bakelite cases and used relatively few metal components, making them difficult to detect with mine detectors of the era. It was primarily used to deter pursuit when withdrawing from an area.The Type I mine had a cylindrical case with a domed upper pressure plate that is held above the main case of the mine by the spring-loaded central fuze well.".
- Italian_Bakelite_Anti-tank_mines label "Italian Bakelite Anti-tank mines".
- Italian_Bakelite_Anti-tank_mines sameAs Q6092655.
- Italian_Bakelite_Anti-tank_mines sameAs m.02q2b73.
- Italian_Bakelite_Anti-tank_mines sameAs İtalyan_bakalit_tanksavar_mayınları.
- Italian_Bakelite_Anti-tank_mines sameAs Q6092655.
- Italian_Bakelite_Anti-tank_mines wasDerivedFrom Italian_Bakelite_Anti-tank_mines?oldid=544730789.
- Italian_Bakelite_Anti-tank_mines isPrimaryTopicOf Italian_Bakelite_Anti-tank_mines.