Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Electronic_beam_curing> ?p ?o }
Showing triples 1 to 29 of
29
with 100 triples per page.
- Electronic_beam_curing abstract "Electronic Beam curing (EBC) is a surface curing process in the manufacture of high pressure laminate (HPL) boards. The process applies color to a single sheet of Kraft paper which is adhered to a HPL board in such a way that it will keep its color durably while remaining scratch-resistant. Unlike other HPL creation methods, EBC does not use heat.The EBC machine used in the curing process gives the finished HPL boards a surface that is both color-fade resistant and has a high resistance to damage. The process works by first mixing color pastes to the desired color and then applying it to a single sheet of kraft paper. This substrate is then put in the EBC machine together with a protective foil. In the machine this sheet is then shot with electrons at such high velocity that the color impregnated paper hardens almost instantly. After being stored in a temperature-controlled room for a short duration the sheets are ready to be adhered to unfinished HPL boards in a process called dry forming.".
- Electronic_beam_curing wikiPageID "37087918".
- Electronic_beam_curing wikiPageLength "1333".
- Electronic_beam_curing wikiPageOutDegree "10".
- Electronic_beam_curing wikiPageRevisionID "525803391".
- Electronic_beam_curing wikiPageWikiLink Category:Composite_materials.
- Electronic_beam_curing wikiPageWikiLink Category:Curing_agents.
- Electronic_beam_curing wikiPageWikiLink Decorative_laminate.
- Electronic_beam_curing wikiPageWikiLink Dry_forming.
- Electronic_beam_curing wikiPageWikiLink Electron.
- Electronic_beam_curing wikiPageWikiLink Foil_stamping.
- Electronic_beam_curing wikiPageWikiLink Kraft_paper.
- Electronic_beam_curing wikiPageWikiLink Substrate_(printing).
- Electronic_beam_curing wikiPageWikiLink Temperature_control.
- Electronic_beam_curing wikiPageWikiLinkText "Electronic beam curing".
- Electronic_beam_curing wikiPageUsesTemplate Template:Reflist.
- Electronic_beam_curing subject Category:Composite_materials.
- Electronic_beam_curing subject Category:Curing_agents.
- Electronic_beam_curing hypernym Surface.
- Electronic_beam_curing type Agent.
- Electronic_beam_curing type Bone.
- Electronic_beam_curing type Agent.
- Electronic_beam_curing comment "Electronic Beam curing (EBC) is a surface curing process in the manufacture of high pressure laminate (HPL) boards. The process applies color to a single sheet of Kraft paper which is adhered to a HPL board in such a way that it will keep its color durably while remaining scratch-resistant.".
- Electronic_beam_curing label "Electronic beam curing".
- Electronic_beam_curing sameAs Q5358335.
- Electronic_beam_curing sameAs m.0n480fl.
- Electronic_beam_curing sameAs Q5358335.
- Electronic_beam_curing wasDerivedFrom Electronic_beam_curing?oldid=525803391.
- Electronic_beam_curing isPrimaryTopicOf Electronic_beam_curing.