Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Computer_Automated_Measurement_and_Control> ?p ?o }
Showing triples 1 to 53 of
53
with 100 triples per page.
- Computer_Automated_Measurement_and_Control abstract "Computer Automated Measurement And Control (CAMAC) is a standard bus and modular-crate electronics standard for data acquisition and control used in nuclear and particle physics experiments and in industry. The bus allows data exchange between plug-in modules (up to 24 in a single crate) and a crate controller, which then interfaces to PC or to a VME-CAMAC interface.The standard was originally defined by the ESONE Committee as standard EUR 4100 in 1972, and covers the mechanical, electrical and logic of a parallel bus (dataway) for the plug-in modules. Several standards have been defined for multiple crate systems including the Parallel Branch Highway definition and Serial Highway definition. Vendor specific Host/Crate interfaces have also been built.The CAMAC standard encompasses IEEE standards: 583 The base standard 683 Block transfer specifications (Q-stop and Q-scan) 596 Parallel Branch Highway systems 595 Serial highway system 726 Real-time Basic for CAMAC 675 Auxiliary crate controller specification/support 758 FORTRAN subroutines for CAMAC.Within the dataway, modules are addressed by slot (geographical addressing). The left-most 22 slots are available for application modules while the right-most two slots are dedicated to a crate controller. Within a slot the standard defines 16 subaddresses (0–15). A slot commanded by the controller with one of 32 function codes (0–31). Of these function codes, 0–7 are read functions and will transfer data to the controller from the addressed module, while 16–23 are write function codes which will transfer data from the controller to the module.In addition to functions that address the module, the following global functions are defined: I – Crate inhibit Z – Crate zero C – Crate clearThe original standard was capable of one 24-bit data transfer every microsecond. Later a revision to the standard was released to support short cycles which allow a transfer every 450 ns. A follow on upwardly compatible standard Fast CAMAC allows the crate cycle time to be tuned to the capabilities of the modules in each slot.The FASTBUS standard was introduced in 1984 as a replacement for CAMAC in large systems.".
- Computer_Automated_Measurement_and_Control thumbnail 4222_Générateur_de_retard_LeCroy_au_format_CAMAC.jpg?width=300.
- Computer_Automated_Measurement_and_Control wikiPageExternalLink introcam.htm.
- Computer_Automated_Measurement_and_Control wikiPageExternalLink default.html.
- Computer_Automated_Measurement_and_Control wikiPageExternalLink camac.
- Computer_Automated_Measurement_and_Control wikiPageID "4780949".
- Computer_Automated_Measurement_and_Control wikiPageLength "3726".
- Computer_Automated_Measurement_and_Control wikiPageOutDegree "20".
- Computer_Automated_Measurement_and_Control wikiPageRevisionID "679470274".
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Bus_(computing).
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Category:Computer_buses.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Category:Experimental_particle_physics.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Crate_controller.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Data_acquisition.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink ESONE_Committee.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink FASTBUS.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Hot_swapping.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink LEMO.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Modular_crate_electronics.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Nuclear_Instrumentation_Module.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Nuclear_physics.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Parallel_Branch_Highway_systems.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Particle_physics.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Real-time_computing.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink Serial_highway_system.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink VMEbus.
- Computer_Automated_Measurement_and_Control wikiPageWikiLink File:4222_Générateur_de_retard_LeCroy_au_format_CAMAC.jpg.
- Computer_Automated_Measurement_and_Control wikiPageWikiLinkText "CAMAC".
- Computer_Automated_Measurement_and_Control wikiPageWikiLinkText "Camac".
- Computer_Automated_Measurement_and_Control wikiPageWikiLinkText "Computer Automated Measurement and Control".
- Computer_Automated_Measurement_and_Control wikiPageWikiLinkText "Computer Automated Measurement and Control, or CAMAC".
- Computer_Automated_Measurement_and_Control wikiPageUsesTemplate Template:Computer-bus.
- Computer_Automated_Measurement_and_Control wikiPageUsesTemplate Template:Reflist.
- Computer_Automated_Measurement_and_Control subject Category:Computer_buses.
- Computer_Automated_Measurement_and_Control subject Category:Experimental_particle_physics.
- Computer_Automated_Measurement_and_Control hypernym Bus.
- Computer_Automated_Measurement_and_Control type Automobile.
- Computer_Automated_Measurement_and_Control type Connector.
- Computer_Automated_Measurement_and_Control type Physic.
- Computer_Automated_Measurement_and_Control type Protocol.
- Computer_Automated_Measurement_and_Control type Redirect.
- Computer_Automated_Measurement_and_Control comment "Computer Automated Measurement And Control (CAMAC) is a standard bus and modular-crate electronics standard for data acquisition and control used in nuclear and particle physics experiments and in industry.".
- Computer_Automated_Measurement_and_Control label "Computer Automated Measurement and Control".
- Computer_Automated_Measurement_and_Control sameAs Q1022778.
- Computer_Automated_Measurement_and_Control sameAs Computer_Automated_Measurement_and_Control.
- Computer_Automated_Measurement_and_Control sameAs CAMAC.
- Computer_Automated_Measurement_and_Control sameAs CAMAC.
- Computer_Automated_Measurement_and_Control sameAs m.0cm_fn.
- Computer_Automated_Measurement_and_Control sameAs КАМАК.
- Computer_Automated_Measurement_and_Control sameAs Q1022778.
- Computer_Automated_Measurement_and_Control wasDerivedFrom Computer_Automated_Measurement_and_Control?oldid=679470274.
- Computer_Automated_Measurement_and_Control depiction 4222_Générateur_de_retard_LeCroy_au_format_CAMAC.jpg.
- Computer_Automated_Measurement_and_Control isPrimaryTopicOf Computer_Automated_Measurement_and_Control.