Matches in DBpedia 2016-04 for { ?s ?p "The Gacka Bridge is located between Žuta Lokva and Ličko Lešće. It is 466 metres (1,529 ft) long, and it comprises four traffic lanes and two emergency lanes. Speed limit enforced on the bridge is 130 km/h. The bridge construction costs were estimated at 115 million Croatian kuna.The bridge spans Gacka River, one of few remaining rivers in Croatia that is considered as readily potable water, along its entire length. Therefore, environmental protection of the area is of paramount importance at the bridge, bringing about very strict environmental protection measures. One of those was a construction requirement that no section of the bridge comes in contact with the riverbed or Gacka channel. This in turn resulted in a considerable span over the channel (89.53 metres (293.7 ft)).The span across the Gacka River was executed using incremental launching, while the span across the Gacka channel, which is the longest, was executed using free cantilevering. The bridge comprises 9 spans: 54.70 metres (179.5 ft) + 89.53 metres (293.7 ft) + 55.46 metres (182.0 ft) + 44.52 metres (146.1 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 31.83 metres (104.4 ft).Substructure of the bridge has been executed by Hidroelektra, Zagreb in 2003, while the deck structure, executed in steel, has been constructed by Đuro Đaković Montaža of Slavonski Brod by the end of 2004. The bridge is designed as two parallel structures, each carrying one carriageway of the A1 motorway. The Gacka Bridge is the only steel bridge built as a part of the motorway between Zagreb and Split. Selection of the steel structure instead of concrete one as in case of all other bridges along the motorway was made due to poor load bearing capacity of the local soil."@en }
Showing triples 1 to 2 of
2
with 100 triples per page.
- Gacka_Bridge abstract "The Gacka Bridge is located between Žuta Lokva and Ličko Lešće. It is 466 metres (1,529 ft) long, and it comprises four traffic lanes and two emergency lanes. Speed limit enforced on the bridge is 130 km/h. The bridge construction costs were estimated at 115 million Croatian kuna.The bridge spans Gacka River, one of few remaining rivers in Croatia that is considered as readily potable water, along its entire length. Therefore, environmental protection of the area is of paramount importance at the bridge, bringing about very strict environmental protection measures. One of those was a construction requirement that no section of the bridge comes in contact with the riverbed or Gacka channel. This in turn resulted in a considerable span over the channel (89.53 metres (293.7 ft)).The span across the Gacka River was executed using incremental launching, while the span across the Gacka channel, which is the longest, was executed using free cantilevering. The bridge comprises 9 spans: 54.70 metres (179.5 ft) + 89.53 metres (293.7 ft) + 55.46 metres (182.0 ft) + 44.52 metres (146.1 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 31.83 metres (104.4 ft).Substructure of the bridge has been executed by Hidroelektra, Zagreb in 2003, while the deck structure, executed in steel, has been constructed by Đuro Đaković Montaža of Slavonski Brod by the end of 2004. The bridge is designed as two parallel structures, each carrying one carriageway of the A1 motorway. The Gacka Bridge is the only steel bridge built as a part of the motorway between Zagreb and Split. Selection of the steel structure instead of concrete one as in case of all other bridges along the motorway was made due to poor load bearing capacity of the local soil.".
- Q5516232 abstract "The Gacka Bridge is located between Žuta Lokva and Ličko Lešće. It is 466 metres (1,529 ft) long, and it comprises four traffic lanes and two emergency lanes. Speed limit enforced on the bridge is 130 km/h. The bridge construction costs were estimated at 115 million Croatian kuna.The bridge spans Gacka River, one of few remaining rivers in Croatia that is considered as readily potable water, along its entire length. Therefore, environmental protection of the area is of paramount importance at the bridge, bringing about very strict environmental protection measures. One of those was a construction requirement that no section of the bridge comes in contact with the riverbed or Gacka channel. This in turn resulted in a considerable span over the channel (89.53 metres (293.7 ft)).The span across the Gacka River was executed using incremental launching, while the span across the Gacka channel, which is the longest, was executed using free cantilevering. The bridge comprises 9 spans: 54.70 metres (179.5 ft) + 89.53 metres (293.7 ft) + 55.46 metres (182.0 ft) + 44.52 metres (146.1 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 43.77 metres (143.6 ft) + 31.83 metres (104.4 ft).Substructure of the bridge has been executed by Hidroelektra, Zagreb in 2003, while the deck structure, executed in steel, has been constructed by Đuro Đaković Montaža of Slavonski Brod by the end of 2004. The bridge is designed as two parallel structures, each carrying one carriageway of the A1 motorway. The Gacka Bridge is the only steel bridge built as a part of the motorway between Zagreb and Split. Selection of the steel structure instead of concrete one as in case of all other bridges along the motorway was made due to poor load bearing capacity of the local soil.".