Matches in DBpedia 2015-10 for { <http://dbpedia.org/resource/Tolerance_coning> ?p ?o }
Showing triples 1 to 27 of
27
with 100 triples per page.
- Tolerance_coning abstract "Tolerance coning is the engineering discipline of creating a budget of all tolerances that potentially add/subtract to affect adequacy of a particular parameter. This is particularly critical where stages of design/manufacture precede test/use.For example, when setting a test limit for a measurement on each manufactured item of some type, to assure that no bad items are shipped, the limit must be tighter than the requirement to allow for the worst case sum of measurement inaccuracies (e.g. equipment, test fixture etc.). The design of the item thus has to take into account not only the product requirement but also the test tolerances. The buildup of this budget is tolerance coning.Electronics engineers intuitively do tolerance coning and tend to formalise it for critical parameters. However it is also relevant to other engineering disciplines.".
- Tolerance_coning wikiPageID "22936371".
- Tolerance_coning wikiPageLength "1013".
- Tolerance_coning wikiPageOutDegree "5".
- Tolerance_coning wikiPageRevisionID "624885691".
- Tolerance_coning wikiPageWikiLink Category:Engineering_concepts.
- Tolerance_coning wikiPageWikiLink Engineering_tolerance.
- Tolerance_coning wikiPageWikiLink Test_fixture.
- Tolerance_coning wikiPageWikiLink Test_method.
- Tolerance_coning wikiPageWikiLink Tolerance_analysis.
- Tolerance_coning wikiPageWikiLink Tolerance_stack.
- Tolerance_coning wikiPageWikiLinkText "Tolerance coning".
- Tolerance_coning hasPhotoCollection Tolerance_coning.
- Tolerance_coning wikiPageUsesTemplate Template:Engineering-stub.
- Tolerance_coning subject Category:Engineering_concepts.
- Tolerance_coning hypernym Discipline.
- Tolerance_coning type Article.
- Tolerance_coning type Sport.
- Tolerance_coning type Article.
- Tolerance_coning type Concept.
- Tolerance_coning comment "Tolerance coning is the engineering discipline of creating a budget of all tolerances that potentially add/subtract to affect adequacy of a particular parameter. This is particularly critical where stages of design/manufacture precede test/use.For example, when setting a test limit for a measurement on each manufactured item of some type, to assure that no bad items are shipped, the limit must be tighter than the requirement to allow for the worst case sum of measurement inaccuracies (e.g.".
- Tolerance_coning label "Tolerance coning".
- Tolerance_coning sameAs m.063zq03.
- Tolerance_coning sameAs Q7814218.
- Tolerance_coning sameAs Q7814218.
- Tolerance_coning wasDerivedFrom Tolerance_coning?oldid=624885691.
- Tolerance_coning isPrimaryTopicOf Tolerance_coning.