Matches in DBpedia 2015-10 for { <http://dbpedia.org/resource/Drift_pin> ?p ?o }
Showing triples 1 to 41 of
41
with 100 triples per page.
- Drift_pin abstract "In metalworking, a drift pin, drift pin punch, or simply drift, is the name for a tool used for enlarging holes, or aligning holes prior to bolting or riveting metal parts together. A drift pin is not used as a punch in the traditional sense of the term. A drift is constructed as a tapered rod, with the hammer acting on the large end of the taper. The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole. As it is driven in, the taper forces the two components into alignment, allowing for easy insertion of the fastener. Unlike most punches, force should never be applied to the tip of drift pin.Drift pins are especially useful for aligning fastener holes in structural steel members. Spud wrenches used for assembling trusses and steel beams have tapered handles to use as drift pins.".
- Drift_pin thumbnail Drift_punch.jpg?width=300.
- Drift_pin wikiPageID "2584013".
- Drift_pin wikiPageLength "1155".
- Drift_pin wikiPageOutDegree "12".
- Drift_pin wikiPageRevisionID "612733517".
- Drift_pin wikiPageWikiLink Category:Metalworking_hand_tools.
- Drift_pin wikiPageWikiLink Fastener.
- Drift_pin wikiPageWikiLink File:Drift_punch.jpg.
- Drift_pin wikiPageWikiLink Hammer.
- Drift_pin wikiPageWikiLink Metalworking.
- Drift_pin wikiPageWikiLink Punch_(metalworking).
- Drift_pin wikiPageWikiLink Punch_(tool).
- Drift_pin wikiPageWikiLink Rivet.
- Drift_pin wikiPageWikiLink Riveting.
- Drift_pin wikiPageWikiLink Spud_wrench.
- Drift_pin wikiPageWikiLink Steel.
- Drift_pin wikiPageWikiLink Structural_steel.
- Drift_pin wikiPageWikiLink Tool.
- Drift_pin wikiPageWikiLink Truss.
- Drift_pin wikiPageWikiLink Wrench.
- Drift_pin wikiPageWikiLinkText "Drift pin".
- Drift_pin wikiPageWikiLinkText "drift pin".
- Drift_pin wikiPageWikiLinkText "drift".
- Drift_pin hasPhotoCollection Drift_pin.
- Drift_pin wikiPageUsesTemplate Template:Metalworking_navbox.
- Drift_pin wikiPageUsesTemplate Template:Unreferenced.
- Drift_pin subject Category:Metalworking_hand_tools.
- Drift_pin hypernym Name.
- Drift_pin type Article.
- Drift_pin type Article.
- Drift_pin type Tool.
- Drift_pin comment "In metalworking, a drift pin, drift pin punch, or simply drift, is the name for a tool used for enlarging holes, or aligning holes prior to bolting or riveting metal parts together. A drift pin is not used as a punch in the traditional sense of the term. A drift is constructed as a tapered rod, with the hammer acting on the large end of the taper. The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole.".
- Drift_pin label "Drift pin".
- Drift_pin sameAs m.07pq0d.
- Drift_pin sameAs Пробойник.
- Drift_pin sameAs Q4379557.
- Drift_pin sameAs Q4379557.
- Drift_pin wasDerivedFrom Drift_pin?oldid=612733517.
- Drift_pin depiction Drift_punch.jpg.
- Drift_pin isPrimaryTopicOf Drift_pin.