Matches in DBpedia 2015-10 for { <http://dbpedia.org/resource/DOT_4> ?p ?o }
Showing triples 1 to 52 of
52
with 100 triples per page.
- DOT_4 abstract "DOT 4 is one of several designations of automotive brake fluid, denoting a particular mixture of chemicals imparting specified ranges of boiling point.In the United States, all brake fluids must meet Standard No. 116; Motor vehicle brake fluids. Under this standard there are three Department of Transportation (DOT) minimum specifications for brake fluid. They are DOT 3, DOT 4, and DOT 5.1. DOT 4, like DOT 3 and DOT 5.1, is a polyglycol ether-based fluid (contrasted with DOT 5 which is silicone-based). Fluids such as DOT 3, 4, and 5.1 are hygroscopic and will absorb water from the atmosphere. This degrades the fluid's performance, and if allowed to accumulate over a period of time, can drastically reduce its boiling point. In a passenger car this is usually not much of an issue as the brakes are generally not used so hard, but can be of serious concerns in racecars or motorcycles due to the higher heat generated during their much more aggressive braking, and trucks where higher heat can be generated while braking hard and fully loaded.While a vehicle that uses DOT 3 may also use DOT 4 or 5.1 if the elastomers in the system accept the borate compounds that raise the boiling point, (a temperature upgrade) a vehicle that requires DOT 4 might boil the brake fluid if a DOT 3 (a temperature downgrade,) is used. Additionally, these polyglycol ether based fluids cannot be mixed with DOT 5.0, which is silicone based.As of 2006, most cars produced in the U.S. use DOT 4 brake fluid.".
- DOT_4 wikiPageExternalLink fmcsrruletext.asp?section=571.116.
- DOT_4 wikiPageID "2533287".
- DOT_4 wikiPageLength "3943".
- DOT_4 wikiPageOutDegree "21".
- DOT_4 wikiPageRevisionID "676912301".
- DOT_4 wikiPageWikiLink Auto_racing.
- DOT_4 wikiPageWikiLink Automotive.
- DOT_4 wikiPageWikiLink Automotive_industry.
- DOT_4 wikiPageWikiLink Boiling_point.
- DOT_4 wikiPageWikiLink Brake_fluid.
- DOT_4 wikiPageWikiLink CAS_Registry_Number.
- DOT_4 wikiPageWikiLink CAS_registry_number.
- DOT_4 wikiPageWikiLink Category:Automotive_chemicals.
- DOT_4 wikiPageWikiLink DOT_3.
- DOT_4 wikiPageWikiLink DOT_5.
- DOT_4 wikiPageWikiLink DOT_5.1.
- DOT_4 wikiPageWikiLink Dibutoxy_tetraglycol.
- DOT_4 wikiPageWikiLink Hygroscopic.
- DOT_4 wikiPageWikiLink Hygroscopy.
- DOT_4 wikiPageWikiLink MSDS.
- DOT_4 wikiPageWikiLink Motorcycle.
- DOT_4 wikiPageWikiLink Polyethylene_glycol.
- DOT_4 wikiPageWikiLink Polyglycol_ether.
- DOT_4 wikiPageWikiLink Racecar.
- DOT_4 wikiPageWikiLink Safety_data_sheet.
- DOT_4 wikiPageWikiLink Silicone.
- DOT_4 wikiPageWikiLink Tetraethylene_glycol.
- DOT_4 wikiPageWikiLink Triethylene_glycol.
- DOT_4 wikiPageWikiLink United_States_Department_of_Transportation.
- DOT_4 wikiPageWikiLinkText "DOT 4".
- DOT_4 hasPhotoCollection DOT_4.
- DOT_4 wikiPageUsesTemplate Template:As_of.
- DOT_4 wikiPageUsesTemplate Template:CAS.
- DOT_4 wikiPageUsesTemplate Template:Cn.
- DOT_4 wikiPageUsesTemplate Template:Convert.
- DOT_4 wikiPageUsesTemplate Template:Fact.
- DOT_4 wikiPageUsesTemplate Template:Reflist.
- DOT_4 subject Category:Automotive_chemicals.
- DOT_4 hypernym Designations.
- DOT_4 type Article.
- DOT_4 type Weapon.
- DOT_4 type Article.
- DOT_4 type Chemical.
- DOT_4 comment "DOT 4 is one of several designations of automotive brake fluid, denoting a particular mixture of chemicals imparting specified ranges of boiling point.In the United States, all brake fluids must meet Standard No. 116; Motor vehicle brake fluids. Under this standard there are three Department of Transportation (DOT) minimum specifications for brake fluid. They are DOT 3, DOT 4, and DOT 5.1.".
- DOT_4 label "DOT 4".
- DOT_4 sameAs DOT_4.
- DOT_4 sameAs m.07lf7s.
- DOT_4 sameAs Q3011416.
- DOT_4 sameAs Q3011416.
- DOT_4 wasDerivedFrom DOT_4?oldid=676912301.
- DOT_4 isPrimaryTopicOf DOT_4.