Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q974493> ?p ?o }
Showing triples 1 to 39 of
39
with 100 triples per page.
- Q974493 subject Q10166902.
- Q974493 subject Q6170879.
- Q974493 subject Q7012530.
- Q974493 subject Q7163188.
- Q974493 abstract "The board-foot is a specialized unit of measure for the volume of lumber in the United States and Canada. It is the volume of a one-foot length of a board one foot wide and one inch thick.Board-foot can be abbreviated FBM (for "foot, board measure"), BDFT, or BF. Thousand board-feet can be abbreviated as MFBM, MBFT, or MBF. Similarly, million board-feet can be abbreviated as MMFBM, MMBFT, or MMBF.In Australia and New Zealand the term super foot or superficial foot was used to mean the same.One board-foot equals: 1 ft × 1 ft × 1 in 12 in × 12 in × 1 in 30.48 cm × 30.48 cm × 2.54 cm 144 in3 1⁄12 ft3 2360 cm3 2.360 liters 0.002360 cubic meters or steres 1/1980 Petrograd Standard of boardBoard foot is the unit of measure for rough lumber (before drying and planing with no adjustments) or planed/surfaced lumber. An example of planed lumber is softwood 2 × 4 lumber one would buy at a large lumber retailer. The 2 × 4 is actually only 1 1⁄2 in × 3 1⁄2 in (38 mm × 89 mm) but the dimensions for the lumber when purchased wholesale could still be represented as full 2 × 4 lumber, although the "standard" can vary between vendors. This means that nominal lumber includes air space around the physical board when calculating board feet in some situations, while the true measurement of "board feet" should be limited to the actual dimensions of the board.For planed lumber, board-feet refer to the nominal thickness and width of lumber, calculated in principle on its size before drying and planing. Actual length is used.See dimensional lumber for a full discussion of the relationship of actual and nominal dimensions. Briefly, for softwoods, to convert nominal to actual, subtract 1⁄4 inch for dimensions under 2 inches (51 mm); subtract 1⁄2 inch for dimensions under 8 inches (203 mm); and subtract 3⁄4 inch for larger measurements. The system is more complicated for hardwoods.An Essex table is a tabulation of the number of board feet in lumber of varying dimensions.".
- Q974493 wikiPageWikiLink Q10166902.
- Q974493 wikiPageWikiLink Q1022113.
- Q974493 wikiPageWikiLink Q11573.
- Q974493 wikiPageWikiLink Q11582.
- Q974493 wikiPageWikiLink Q12216016.
- Q974493 wikiPageWikiLink Q1370714.
- Q974493 wikiPageWikiLink Q1585993.
- Q974493 wikiPageWikiLink Q16.
- Q974493 wikiPageWikiLink Q17166070.
- Q974493 wikiPageWikiLink Q204260.
- Q974493 wikiPageWikiLink Q218593.
- Q974493 wikiPageWikiLink Q223662.
- Q974493 wikiPageWikiLink Q2266509.
- Q974493 wikiPageWikiLink Q252108.
- Q974493 wikiPageWikiLink Q25517.
- Q974493 wikiPageWikiLink Q30.
- Q974493 wikiPageWikiLink Q39297.
- Q974493 wikiPageWikiLink Q47574.
- Q974493 wikiPageWikiLink Q5192252.
- Q974493 wikiPageWikiLink Q5469189.
- Q974493 wikiPageWikiLink Q5901295.
- Q974493 wikiPageWikiLink Q6170879.
- Q974493 wikiPageWikiLink Q641227.
- Q974493 wikiPageWikiLink Q6804199.
- Q974493 wikiPageWikiLink Q6824308.
- Q974493 wikiPageWikiLink Q6826784.
- Q974493 wikiPageWikiLink Q6885811.
- Q974493 wikiPageWikiLink Q7012530.
- Q974493 wikiPageWikiLink Q7163188.
- Q974493 wikiPageWikiLink Q7178916.
- Q974493 wikiPageWikiLink Q7980151.
- Q974493 wikiPageWikiLink Q920297.
- Q974493 comment "The board-foot is a specialized unit of measure for the volume of lumber in the United States and Canada. It is the volume of a one-foot length of a board one foot wide and one inch thick.Board-foot can be abbreviated FBM (for "foot, board measure"), BDFT, or BF. Thousand board-feet can be abbreviated as MFBM, MBFT, or MBF.".
- Q974493 label "Board foot".