Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q6693964> ?p ?o }
Showing triples 1 to 21 of
21
with 100 triples per page.
- Q6693964 subject Q8280405.
- Q6693964 abstract "A lower tie bar is an alloy/steel bar that ties the lower suspension pick-up points of a vehicle (with an independent suspension) together. It increases chassis rigidity by bracing the left and right lower-control-arm sheet metal mounting points. The lower tie bar is designed to reduce the non-pivoting movement of the control arms and to stiffen the subframe to lessen the distortion of the lower suspension, especially during hard cornering. As a result, it improves the handling and steering response of the vehicle much like a strut bar. A lower tie bar may provide additional benefits in front-wheel drive vehicles by reducing wheel hop and torque steer. The bar lowers ground clearance by approximately 30 millimeters on most aftermarket installations.The lower tie bar is mostly an aftermarket car component. Some of the few exceptions to this rule are the Honda Integra and Civic Type-R, as well as the Daihatsu Charade GTti. Since the lower tie bar is one of the cheapest upgrade that tuners can install on their cars, it is probably one of the first performance accessories that is acquired. The lower tie bar is a bolt-on device and no stock parts will have to be replaced or removed when it is being installed on the vehicle (unless the vehicle already has one on it). These characteristics make the lower tie bar a popular performance upgrade among car tuning enthusiasts mainly pursuing for appearance rather than rigidity gain.".
- Q6693964 thumbnail Lower_tie_bar.JPG?width=300.
- Q6693964 wikiPageWikiLink Q11427.
- Q6693964 wikiPageWikiLink Q1238737.
- Q6693964 wikiPageWikiLink Q1310203.
- Q6693964 wikiPageWikiLink Q1757684.
- Q6693964 wikiPageWikiLink Q211367.
- Q6693964 wikiPageWikiLink Q272870.
- Q6693964 wikiPageWikiLink Q376134.
- Q6693964 wikiPageWikiLink Q37756.
- Q6693964 wikiPageWikiLink Q731988.
- Q6693964 wikiPageWikiLink Q753025.
- Q6693964 wikiPageWikiLink Q7631141.
- Q6693964 wikiPageWikiLink Q7826801.
- Q6693964 wikiPageWikiLink Q8280405.
- Q6693964 wikiPageWikiLink Q847962.
- Q6693964 wikiPageWikiLink Q889522.
- Q6693964 comment "A lower tie bar is an alloy/steel bar that ties the lower suspension pick-up points of a vehicle (with an independent suspension) together. It increases chassis rigidity by bracing the left and right lower-control-arm sheet metal mounting points. The lower tie bar is designed to reduce the non-pivoting movement of the control arms and to stiffen the subframe to lessen the distortion of the lower suspension, especially during hard cornering.".
- Q6693964 label "Lower tie bar".
- Q6693964 depiction Lower_tie_bar.JPG.