Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q5187588> ?p ?o }
Showing triples 1 to 24 of
24
with 100 triples per page.
- Q5187588 subject Q7465264.
- Q5187588 abstract "Z-2 is the name of a series of microcomputers made by Cromemco, Inc. which were introduced to the market in the middle to late 1970s.They were originally available in assembled or kit form to serve both a commercial market and the computer enthusiast market. Later the machines were only available factory-assembled. These Cromemco machines were widely respected for their speed, configurability, durability, and reliability.The Cromemco Z-2 computer was a Z80–based microcomputer system that was introduced in 1977. The original Z-2 in kit form included a ZPU-K Z80 CPU card, S-100 bus motherboard, all-metal rack-mount chassis and dust case, card socket and card guide; the assembled form included a complete set of sockets and card guides, and a cooling fan. The Z-2 series was capable of supporting up to 21 S-100 boards and could be configured with any of the boards supplied by Cromemco.The Z-2 gave an impression of solidity due to its hefty 450-watt power supply and heavy metal chassis. A TU-ART (dual serial and parallel board), 4FDC Floppy Disk Controller, one or more 16KZRAM cards, and a Wangco 5¼" floppy disk drive would be added to form a basic system.An unusual feature of the Z-2 was switch–selectable CPU speed; 250 or 500 nanosecond cycle time were available. The ZPU speed was 4 MHz at a time when less than 2 MHz was normal, and boards from other manufacturers might still require the slower speed. The ZPU card in the Z-2 could address up to 64 kilobytes of RAM. However, the 16KZ memory card supported bank-switching with 8 banks of 64 kilobytes each. When using the 16KZ, the maximum RAM of the Z-2 was limited by the available S-100 slots. If 16 of the slots were occupied by 16KZ cards, then the system had 4 banks of 64 kilobytes each, for a total of 256 kilobytes.Additional S-100 slots were required for cards controlling peripherals, disk drives, and I/O interfaces. Communication with the processor was normally performed through a TU-ART or other S-100 bus compatible interface card, which could run a CRT terminal or teletype.".
- Q5187588 thumbnail Cromemco_Z2_Ad_July_1977.jpg?width=300.
- Q5187588 wikiPageExternalLink Cromemco%20Z-2H%20Installation%20023-0087%20198001.pdf.
- Q5187588 wikiPageExternalLink Cromemco%2016KZ%20RAM%20Instruction%20Manual.pdf.
- Q5187588 wikiPageWikiLink Q1071967.
- Q5187588 wikiPageWikiLink Q1140841.
- Q5187588 wikiPageWikiLink Q1546156.
- Q5187588 wikiPageWikiLink Q203315.
- Q5187588 wikiPageWikiLink Q204157.
- Q5187588 wikiPageWikiLink Q32738.
- Q5187588 wikiPageWikiLink Q37643.
- Q5187588 wikiPageWikiLink Q4321.
- Q5187588 wikiPageWikiLink Q4638900.
- Q5187588 wikiPageWikiLink Q5293.
- Q5187588 wikiPageWikiLink Q610120.
- Q5187588 wikiPageWikiLink Q7465264.
- Q5187588 wikiPageWikiLink Q79726.
- Q5187588 wikiPageWikiLink Q806652.
- Q5187588 wikiPageWikiLink Q838801.
- Q5187588 wikiPageWikiLink Q916240.
- Q5187588 comment "Z-2 is the name of a series of microcomputers made by Cromemco, Inc. which were introduced to the market in the middle to late 1970s.They were originally available in assembled or kit form to serve both a commercial market and the computer enthusiast market. Later the machines were only available factory-assembled.".
- Q5187588 label "Cromemco Z-2".
- Q5187588 depiction Cromemco_Z2_Ad_July_1977.jpg.