Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q259838> ?p ?o }
Showing triples 1 to 38 of
38
with 100 triples per page.
- Q259838 subject Q6154868.
- Q259838 subject Q7464713.
- Q259838 subject Q9061539.
- Q259838 abstract "A multivibrator is an electronic circuit used to implement a variety of simple multi-state systems such as oscillators, timers and flip-flops. It is characterized by two amplifying devices (transistors, electron tubes or other devices) cross-coupled by resistors or capacitors. The name "multivibrator" was initially applied to the free-running oscillator version of the circuit because its output waveform was rich in harmonics.Some common types of multivibrator circuits are:Astable, in which the circuit is not stable in either state —it continually switches from one state to the other. It functions as a relaxation oscillator.Monostable, in which one of the states is stable, but the other state is unstable (transient). A trigger pulse causes the circuit to enter the unstable state. After entering the unstable state, the circuit will return to the stable state after a set time. Such a circuit is useful for creating a timing period of fixed duration in response to some external event. This circuit is also known as a one shot.Bistable, in which the circuit is stable in either state. It can be flipped from one state to the other by an external trigger pulse. This circuit is also known as a flip-flop. It can be used to store one bit of information.Multivibrators find applications in a variety of systems where square waves or timed intervals are required. For example, before the advent of low-cost integrated circuits, chains of multivibrators found use as frequency dividers. A free-running multivibrator with a frequency of one-half to one-tenth of the reference frequency would accurately lock to the reference frequency. This technique was used in early electronic organs, to keep notes of different octaves accurately in tune. Other applications included early television systems, where the various line and frame frequencies were kept synchronized by pulses included in the video signal.".
- Q259838 thumbnail Original_Abraham-Bloch_multivibrator_circuit.png?width=300.
- Q259838 wikiPageExternalLink e-multivib-a.html.
- Q259838 wikiPageExternalLink watch?v=4lFj6h-U6WI.
- Q259838 wikiPageWikiLink Q1148098.
- Q259838 wikiPageWikiLink Q11652.
- Q259838 wikiPageWikiLink Q11656.
- Q259838 wikiPageWikiLink Q1421688.
- Q259838 wikiPageWikiLink Q1455624.
- Q259838 wikiPageWikiLink Q178947.
- Q259838 wikiPageWikiLink Q1815901.
- Q259838 wikiPageWikiLink Q183406.
- Q259838 wikiPageWikiLink Q186612.
- Q259838 wikiPageWikiLink Q202957.
- Q259838 wikiPageWikiLink Q249997.
- Q259838 wikiPageWikiLink Q27094.
- Q259838 wikiPageWikiLink Q289.
- Q259838 wikiPageWikiLink Q324919.
- Q259838 wikiPageWikiLink Q3574371.
- Q259838 wikiPageWikiLink Q386025.
- Q259838 wikiPageWikiLink Q39369.
- Q259838 wikiPageWikiLink Q5321.
- Q259838 wikiPageWikiLink Q5322.
- Q259838 wikiPageWikiLink Q5339.
- Q259838 wikiPageWikiLink Q557120.
- Q259838 wikiPageWikiLink Q599031.
- Q259838 wikiPageWikiLink Q6154868.
- Q259838 wikiPageWikiLink Q623704.
- Q259838 wikiPageWikiLink Q7464713.
- Q259838 wikiPageWikiLink Q8805.
- Q259838 wikiPageWikiLink Q9061539.
- Q259838 wikiPageWikiLink Q939318.
- Q259838 comment "A multivibrator is an electronic circuit used to implement a variety of simple multi-state systems such as oscillators, timers and flip-flops. It is characterized by two amplifying devices (transistors, electron tubes or other devices) cross-coupled by resistors or capacitors.".
- Q259838 label "Multivibrator".
- Q259838 depiction Original_Abraham-Bloch_multivibrator_circuit.png.