Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q2141190> ?p ?o }
Showing triples 1 to 12 of
12
with 100 triples per page.
- Q2141190 abstract "The Anchor Bend is a knot used for attaching a rope to a ring or similar termination. Its name originates from the time when "bend" was understood to mean "tie to", and not restricted to knots that join rope ends. While the knot can become jammed in some modern materials, it is usually easily untied after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object--this will make for a 1-diameter longer span of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible). It is the accepted knot for attaching anchors (or more usually anchor chains) to warps. The knot is very similar to a round turn and two half hitches except that the first half hitch is passed under the turn. In many everyday uses, the finishing half-hitch need not be made; alternatively, one might seek surer security by tying off the end with a Strangle knot to the standing part.".
- Q2141190 thumbnail Roringstek.jpg?width=300.
- Q2141190 wikiPageWikiLink Q1365509.
- Q2141190 wikiPageWikiLink Q168432.
- Q2141190 wikiPageWikiLink Q1854739.
- Q2141190 wikiPageWikiLink Q2176331.
- Q2141190 wikiPageWikiLink Q263859.
- Q2141190 wikiPageWikiLink Q3534897.
- Q2141190 wikiPageWikiLink Q527395.
- Q2141190 comment "The Anchor Bend is a knot used for attaching a rope to a ring or similar termination. Its name originates from the time when "bend" was understood to mean "tie to", and not restricted to knots that join rope ends.".
- Q2141190 label "Anchor bend".
- Q2141190 depiction Roringstek.jpg.