Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q2085393> ?p ?o }
Showing triples 1 to 24 of
24
with 100 triples per page.
- Q2085393 subject Q5460952.
- Q2085393 subject Q5905276.
- Q2085393 abstract "Phase inversion is the swapping of the two poles of an alternating current source. A phase inversion is neither a time shift nor a phase shift, but simply a swap of plus and minus.For example, in a push-pull power amplifier using vacuum tubes, the signal is most often split by a phase splitter (aka phase inverter) stage which produces two signals, one in phase, and the other out of phase, that is, phase inverted. These two signals then drive the two halves of the first push-pull stage, which may be either the output stage (in which case the phase splitter will be in between the driver stage if there is one and the output stage) or the driver stage. The other common arrangements for driving a push-pull stage are by using an isolation transformer to produce the split signals, or by using the in-phase half of the first push-pull stage to drive the other half. A common circuit using this last technique is the long-tailed pair, often seen in television sets and oscilloscopes. In solid state electronics all of these techniques can be used, and phase inversion can also be produced by the use of NPN/PNP complementary circuitry, which has no corresponding technique in vacuum tube designs. Phase inversion may occur with a random or periodic, symmetrical or non-symmetrical waveform, although it is usually produced by the inversion of a symmetrical periodic signal, resulting in a change in sign. A symmetrical periodic signal represented by f (t ) = A ejωt, after phase inversion, becomes f 1(t ) = Aej(ωt +π), where t is time, A is the magnitude of the vector, ω is angular frequency (ω = 2πf ), where f is the frequency and π ≈3.1416 and e ≈ 2.7183. The algebraic sum of f (t ) and f 1(t ) will always be zero.12px This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C".".
- Q2085393 wikiPageWikiLink Q1056298.
- Q2085393 wikiPageWikiLink Q11471.
- Q2085393 wikiPageWikiLink Q11652.
- Q2085393 wikiPageWikiLink Q1165717.
- Q2085393 wikiPageWikiLink Q124164.
- Q2085393 wikiPageWikiLink Q13228.
- Q2085393 wikiPageWikiLink Q174320.
- Q2085393 wikiPageWikiLink Q187634.
- Q2085393 wikiPageWikiLink Q2166404.
- Q2085393 wikiPageWikiLink Q2501541.
- Q2085393 wikiPageWikiLink Q34172.
- Q2085393 wikiPageWikiLink Q3574371.
- Q2085393 wikiPageWikiLink Q4480532.
- Q2085393 wikiPageWikiLink Q5460952.
- Q2085393 wikiPageWikiLink Q5905276.
- Q2085393 wikiPageWikiLink Q611957.
- Q2085393 wikiPageWikiLink Q758907.
- Q2085393 wikiPageWikiLink Q799875.
- Q2085393 wikiPageWikiLink Q8075.
- Q2085393 comment "Phase inversion is the swapping of the two poles of an alternating current source. A phase inversion is neither a time shift nor a phase shift, but simply a swap of plus and minus.For example, in a push-pull power amplifier using vacuum tubes, the signal is most often split by a phase splitter (aka phase inverter) stage which produces two signals, one in phase, and the other out of phase, that is, phase inverted.".
- Q2085393 label "Phase inversion".