Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q1852883> ?p ?o }
Showing triples 1 to 29 of
29
with 100 triples per page.
- Q1852883 subject Q13423758.
- Q1852883 subject Q5470782.
- Q1852883 subject Q6258280.
- Q1852883 abstract "In the power systems analysis field of electrical engineering, a per-unit system is the expression of system quantities as fractions of a defined base unit quantity. Calculations are simplified because quantities expressed as per-unit do not change when they are referred from one side of a transformer to the other. This can be a pronounced advantage in power system analysis where large numbers of transformers may be encountered. Moreover, similar types of apparatus will have the impedances lying within a narrow numerical range when expressed as a per-unit fraction of the equipment rating, even if the unit size varies widely. Conversion of per-unit quantities to volts, ohms, or amperes requires a knowledge of the base that the per-unit quantities were referenced to.The main idea of a per unit system is to absorb large difference in absolute values into base relationships. Thus, representations of elements in the system with per unit values become more uniform.A per-unit system provides units for; power, voltage, current, impedance, and admittance. Except impedance and admittance, any two of these are independent and can be arbitrarily selected as base values, usually power and voltage. All quantities are specified as multiples of selected base values. For example, the base power might be the rated power of a transformer, or perhaps an arbitrarily selected power which makes power quantities in the system more convenient. The base voltage might be the nominal voltage of a bus. Different types of quantities are labeled with the same symbol (pu); it should be clear from context whether the quantity is a voltage, current, etc.Per-unit being used in power flow, short circuit evaluation and motor starting studies, it is important for all power engineers to be familiar with the concept.".
- Q1852883 wikiPageExternalLink Industrial_power_systems_handbook.html?id=zOgiAAAAMAAJ.
- Q1852883 wikiPageExternalLink books?id=U77A2C37QesC&dq=power+system+analysis+and+design&source=gbs_navlinks_s.
- Q1852883 wikiPageWikiLink Q1030817.
- Q1852883 wikiPageWikiLink Q11651.
- Q1852883 wikiPageWikiLink Q11658.
- Q1852883 wikiPageWikiLink Q12162442.
- Q1852883 wikiPageWikiLink Q1225223.
- Q1852883 wikiPageWikiLink Q13423758.
- Q1852883 wikiPageWikiLink Q179043.
- Q1852883 wikiPageWikiLink Q1803786.
- Q1852883 wikiPageWikiLink Q1930258.
- Q1852883 wikiPageWikiLink Q206907.
- Q1852883 wikiPageWikiLink Q214518.
- Q1852883 wikiPageWikiLink Q2388981.
- Q1852883 wikiPageWikiLink Q25428.
- Q1852883 wikiPageWikiLink Q260295.
- Q1852883 wikiPageWikiLink Q2666306.
- Q1852883 wikiPageWikiLink Q27137.
- Q1852883 wikiPageWikiLink Q41591.
- Q1852883 wikiPageWikiLink Q43035.
- Q1852883 wikiPageWikiLink Q5470782.
- Q1852883 wikiPageWikiLink Q556030.
- Q1852883 wikiPageWikiLink Q6258280.
- Q1852883 comment "In the power systems analysis field of electrical engineering, a per-unit system is the expression of system quantities as fractions of a defined base unit quantity. Calculations are simplified because quantities expressed as per-unit do not change when they are referred from one side of a transformer to the other. This can be a pronounced advantage in power system analysis where large numbers of transformers may be encountered.".
- Q1852883 label "Per-unit system".