Matches in DBpedia 2016-04 for { <http://wikidata.dbpedia.org/resource/Q1066303> ?p ?o }
Showing triples 1 to 44 of
44
with 100 triples per page.
- Q1066303 subject Q5873566.
- Q1066303 subject Q7056690.
- Q1066303 subject Q7213750.
- Q1066303 subject Q8391144.
- Q1066303 subject Q8461224.
- Q1066303 abstract "Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas. This is the preferred method of drying of many thermally-sensitive materials such as foods and pharmaceuticals. A consistent particle size distribution is a reason for spray drying some industrial products such as catalysts. Air is the heated drying medium; however, if the liquid is a flammable solvent such as ethanol or the product is oxygen-sensitive then nitrogen is used.All spray dryers use some type of atomizer or spray nozzle to disperse the liquid or slurry into a controlled drop size spray. The most common of these are rotary disks and single-fluid high pressure swirl nozzles. Atomizer wheels are known to provide broader particle size distribution, but both methods allow for consistent distribution of particle size. Alternatively, for some applications two-fluid or ultrasonic nozzles are used. Depending on the process needs, drop sizes from 10 to 500 µm can be achieved with the appropriate choices. The most common applications are in the 100 to 200 µm diameter range. The dry powder is often free-flowing.The most common type of spray dryers are called single effect. There is a single source of drying air at the top of the chamber (see n°4 on the diagram). In most cases the air is blown in the same direction as the sprayed liquid (co-current). A fine powder is produced, but it can have poor flow and produce a lot of dust. To overcome the dust and poor flow of the powder, a new generation of spray dryers called multiple effect spray dryers have been produced. Instead of drying the liquid in one stage, drying is done through two steps: the first at the top (as per single effect) and the second with an integrated static bed at the bottom of the chamber. The bed provides a humid environment which causes smaller particles to clump, producing more uniform particle sizes, usually within the range of 100 to 300 µm. These powders are free-flowing due to the larger particle size.The fine powders generated by the first stage drying can be recycled in continuous flow either at the top of the chamber (around the sprayed liquid) or at the bottom, inside the integrated fluidized bed.The drying of the powder can be finalized on an external vibrating fluidized bed.The hot drying gas can be passed in as a co-current, same direction as sprayed liquid atomizer, or counter-current, where the hot air flows against the flow from the atomizer. With co-current flow, particles spend less time in the system and the particle separator (typically a cyclone device). With counter-current flow, particles spend more time in the system and is usually paired with a fluidized bed system. Co-current flow generally allows the system to operate more efficiently.Alternatives to spray dryers are:Freeze dryer: a more-expensive batch process for products that degrade in spray drying. Dry product is not free-flowing.Drum dryer: a less-expensive continuous process for low-value products; creates flakes instead of free-flowing powder.Pulse combustion dryer: A less-expensive continuous process that can handle higher viscosities and solids loading than a spray dryer, and that sometimes gives a freeze-dry quality powder that is free-flowing.↑ ↑ ↑ ↑".
- Q1066303 thumbnail Labspraydryer.svg?width=300.
- Q1066303 wikiPageExternalLink books?id=CYELHT3DQuEC&pg=PP1.
- Q1066303 wikiPageExternalLink All-downloads.654.0.html?&no_cache=1&no_cache=1&file=308&uid=880.
- Q1066303 wikiPageExternalLink SD-e.htm.
- Q1066303 wikiPageWikiLink Q1165158.
- Q1066303 wikiPageWikiLink Q12140.
- Q1066303 wikiPageWikiLink Q153.
- Q1066303 wikiPageWikiLink Q170749.
- Q1066303 wikiPageWikiLink Q175821.
- Q1066303 wikiPageWikiLink Q192197.
- Q1066303 wikiPageWikiLink Q2167111.
- Q1066303 wikiPageWikiLink Q219567.
- Q1066303 wikiPageWikiLink Q26100.
- Q1066303 wikiPageWikiLink Q2611095.
- Q1066303 wikiPageWikiLink Q2666694.
- Q1066303 wikiPageWikiLink Q283.
- Q1066303 wikiPageWikiLink Q3821254.
- Q1066303 wikiPageWikiLink Q3870148.
- Q1066303 wikiPageWikiLink Q415766.
- Q1066303 wikiPageWikiLink Q421110.
- Q1066303 wikiPageWikiLink Q496696.
- Q1066303 wikiPageWikiLink Q5307704.
- Q1066303 wikiPageWikiLink Q5309085.
- Q1066303 wikiPageWikiLink Q54237.
- Q1066303 wikiPageWikiLink Q5723218.
- Q1066303 wikiPageWikiLink Q5873566.
- Q1066303 wikiPageWikiLink Q627.
- Q1066303 wikiPageWikiLink Q7056690.
- Q1066303 wikiPageWikiLink Q7213750.
- Q1066303 wikiPageWikiLink Q723912.
- Q1066303 wikiPageWikiLink Q7880648.
- Q1066303 wikiPageWikiLink Q8391144.
- Q1066303 wikiPageWikiLink Q8461224.
- Q1066303 wikiPageWikiLink Q898412.
- Q1066303 wikiPageWikiLink Q902356.
- Q1066303 comment "Spray drying is a method of producing a dry powder from a liquid or slurry by rapidly drying with a hot gas. This is the preferred method of drying of many thermally-sensitive materials such as foods and pharmaceuticals. A consistent particle size distribution is a reason for spray drying some industrial products such as catalysts.".
- Q1066303 label "Spray drying".
- Q1066303 depiction Labspraydryer.svg.