Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/T-square> ?p ?o }
Showing triples 1 to 57 of
57
with 100 triples per page.
- T-square abstract "A T-square is a technical drawing instrument used by draftsmen primarily as a guide for drawing horizontal lines on a drafting table. It may also guide a set square to draw vertical or diagonal lines. Its name comes from its resemblance to the letter T. T-squares come in varying sizes, common lengths being 18 inches (460 mm), 24 inches (610 mm), 30 inches (760 mm), 36 inches (910 mm) and 42 inches (1,100 mm).T-squares are also used to measure and cut drywall. Drywall T-squares are typically made of aluminium and have a 48-inch (1,200 mm) long tongue.Higher-end table saws are often equipped with T-square fences. These table saw fences are attached to a rail only on the front side of the table unlike traditional fences which clamp to both the front and the rear of the table.A T-square has two components - the long shaft called the \"blade\" and the short shaft called the \"stock\" or also known as head. The T-square usually has a transparent edge made of plastic which should be free of nicks and cracks in order to provide smooth, straight lines.".
- T-square thumbnail Drafting_board_with_T_Square.jpg?width=300.
- T-square wikiPageID "387924".
- T-square wikiPageLength "1851".
- T-square wikiPageOutDegree "14".
- T-square wikiPageRevisionID "678520672".
- T-square wikiPageWikiLink Aluminium.
- T-square wikiPageWikiLink Category:Technical_drawing.
- T-square wikiPageWikiLink Drawing_board.
- T-square wikiPageWikiLink Drywall.
- T-square wikiPageWikiLink Fence_(woodworking).
- T-square wikiPageWikiLink Measuring_instrument.
- T-square wikiPageWikiLink Plan_(drawing).
- T-square wikiPageWikiLink Plastic.
- T-square wikiPageWikiLink Table_saw.
- T-square wikiPageWikiLink Technical_drawing.
- T-square wikiPageWikiLink Technical_drawing_tool.
- T-square wikiPageWikiLink Tongue.
- T-square wikiPageWikiLink Transparency_and_translucency.
- T-square wikiPageWikiLink File:Drafting_board_with_T_Square.jpg.
- T-square wikiPageWikiLinkText "T-square".
- T-square wikiPageWikiLinkText "Tee Squares".
- T-square wikiPageWikiLinkText "draftsman's T".
- T-square wikiPageWikiLinkText "normal".
- T-square wikiPageWikiLinkText "t-square".
- T-square wikiPageUsesTemplate Template:Citation_needed.
- T-square wikiPageUsesTemplate Template:Convert.
- T-square wikiPageUsesTemplate Template:Measuring_and_alignment_tools.
- T-square wikiPageUsesTemplate Template:Other_uses.
- T-square wikiPageUsesTemplate Template:Refimprove.
- T-square wikiPageUsesTemplate Template:Reflist.
- T-square subject Category:Technical_drawing.
- T-square hypernym Instrument.
- T-square type Agent.
- T-square type Infographic.
- T-square type Occupation.
- T-square type Redirect.
- T-square comment "A T-square is a technical drawing instrument used by draftsmen primarily as a guide for drawing horizontal lines on a drafting table. It may also guide a set square to draw vertical or diagonal lines. Its name comes from its resemblance to the letter T. T-squares come in varying sizes, common lengths being 18 inches (460 mm), 24 inches (610 mm), 30 inches (760 mm), 36 inches (910 mm) and 42 inches (1,100 mm).T-squares are also used to measure and cut drywall.".
- T-square label "T-square".
- T-square sameAs Q1559301.
- T-square sameAs مسطرة_حرف_تي.
- T-square sameAs Category:T-squares.
- T-square sameAs Reißschiene.
- T-square sameAs Regla_T.
- T-square sameAs T定規.
- T-square sameAs Reišina.
- T-square sameAs Przykładnica.
- T-square sameAs Régua_T.
- T-square sameAs m.022ftn.
- T-square sameAs Рейсшина.
- T-square sameAs ไม้ที.
- T-square sameAs Рейсшина.
- T-square sameAs Q1559301.
- T-square sameAs 丁字尺.
- T-square wasDerivedFrom T-square?oldid=678520672.
- T-square depiction Drafting_board_with_T_Square.jpg.
- T-square isPrimaryTopicOf T-square.