Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Spur_gear_corrected_tooth> ?p ?o }
Showing triples 1 to 24 of
24
with 100 triples per page.
- Spur_gear_corrected_tooth abstract "Spur gear teeth are manufactured by either involute profile or cycloidal profile. Most of the gears are manufactured by involute profile with 20° pressure angle. When two gears are in mesh at one instant there is a chance to mate involute portion with non-involute portion of mating gear. This phenomenon is known as INTERFERENCE and occurs when the number of teeth on the smaller of the two meshing gears is less than a required minimum. To avoid interference we can have undercutting, but this is not a suitable solution as undercutting leads to weakening of tooth at its base. In this situation Corrected gears are used. In corrected gears Cutter rack is shifted upwards or downwards.".
- Spur_gear_corrected_tooth wikiPageID "6881317".
- Spur_gear_corrected_tooth wikiPageLength "1407".
- Spur_gear_corrected_tooth wikiPageOutDegree "4".
- Spur_gear_corrected_tooth wikiPageRevisionID "694674452".
- Spur_gear_corrected_tooth wikiPageWikiLink Category:Gears.
- Spur_gear_corrected_tooth wikiPageWikiLink Gear.
- Spur_gear_corrected_tooth wikiPageWikiLink Involute.
- Spur_gear_corrected_tooth wikiPageWikiLink Undercut_(manufacturing).
- Spur_gear_corrected_tooth wikiPageUsesTemplate Template:Context.
- Spur_gear_corrected_tooth wikiPageUsesTemplate Template:Expert-subject.
- Spur_gear_corrected_tooth wikiPageUsesTemplate Template:Industry-stub.
- Spur_gear_corrected_tooth wikiPageUsesTemplate Template:Main.
- Spur_gear_corrected_tooth wikiPageUsesTemplate Template:Reflist.
- Spur_gear_corrected_tooth subject Category:Gears.
- Spur_gear_corrected_tooth type Gear.
- Spur_gear_corrected_tooth type Page.
- Spur_gear_corrected_tooth comment "Spur gear teeth are manufactured by either involute profile or cycloidal profile. Most of the gears are manufactured by involute profile with 20° pressure angle. When two gears are in mesh at one instant there is a chance to mate involute portion with non-involute portion of mating gear. This phenomenon is known as INTERFERENCE and occurs when the number of teeth on the smaller of the two meshing gears is less than a required minimum.".
- Spur_gear_corrected_tooth label "Spur gear corrected tooth".
- Spur_gear_corrected_tooth sameAs Q7581549.
- Spur_gear_corrected_tooth sameAs m.0gv0w7.
- Spur_gear_corrected_tooth sameAs Q7581549.
- Spur_gear_corrected_tooth wasDerivedFrom Spur_gear_corrected_tooth?oldid=694674452.
- Spur_gear_corrected_tooth isPrimaryTopicOf Spur_gear_corrected_tooth.