Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Shoulder_plane> ?p ?o }
Showing triples 1 to 34 of
34
with 100 triples per page.
- Shoulder_plane abstract "The shoulder plane (also bullnose plane) is a plane tool with a blade flush with the edges of the plane, allowing trimming right up to the edge of a workpiece. Like a rebate plane, the shoulder plane's blade extends, therefore cuts, to the full width of the tool. The shoulder plane is used to trim the shoulders and faces of tenons. It is used when it is necessary to trim right into the concave corner where two surfaces of the same piece of wood meet perpendicularly. It is also commonly used to clean up dadoes (housings) and tenons for joinery.Unlike the rebate plane, the shoulder plane is intended to cut end grain. There are therefore differences between it and a rebate plane in the angles at which the iron (blade) is set. There is a more acute angle between the iron and the sole of the tool. The iron is set square across the tool rather than obliquely. The iron is set face down. The ground and honed bevel forming the edge is uppermost.A shoulder plane also has a much finer set mouth, which allows finer shavings to be taken.".
- Shoulder_plane thumbnail BullnoseShoulderPlane.jpg?width=300.
- Shoulder_plane wikiPageExternalLink sPlanes1.asp.
- Shoulder_plane wikiPageID "452984".
- Shoulder_plane wikiPageLength "1563".
- Shoulder_plane wikiPageOutDegree "8".
- Shoulder_plane wikiPageRevisionID "672905861".
- Shoulder_plane wikiPageWikiLink Angle.
- Shoulder_plane wikiPageWikiLink Category:Planes.
- Shoulder_plane wikiPageWikiLink Mortise_and_tenon.
- Shoulder_plane wikiPageWikiLink Plane_(tool).
- Shoulder_plane wikiPageWikiLink Rebate_plane.
- Shoulder_plane wikiPageWikiLink Shoulder.
- Shoulder_plane wikiPageWikiLink Wood_grain.
- Shoulder_plane wikiPageWikiLink File:BullnoseShoulderPlane.jpg.
- Shoulder_plane wikiPageWikiLinkText "Shoulder_plane".
- Shoulder_plane wikiPageWikiLinkText "shoulder plane".
- Shoulder_plane wikiPageUsesTemplate Template:Cite_web.
- Shoulder_plane wikiPageUsesTemplate Template:Planes.
- Shoulder_plane subject Category:Planes.
- Shoulder_plane hypernym Tool.
- Shoulder_plane type Software.
- Shoulder_plane type Tool.
- Shoulder_plane comment "The shoulder plane (also bullnose plane) is a plane tool with a blade flush with the edges of the plane, allowing trimming right up to the edge of a workpiece. Like a rebate plane, the shoulder plane's blade extends, therefore cuts, to the full width of the tool. The shoulder plane is used to trim the shoulders and faces of tenons. It is used when it is necessary to trim right into the concave corner where two surfaces of the same piece of wood meet perpendicularly.".
- Shoulder_plane label "Shoulder plane".
- Shoulder_plane sameAs Q838095.
- Shoulder_plane sameAs Simshobel.
- Shoulder_plane sameAs Guillaume_(outil).
- Shoulder_plane sameAs m.02bb9c.
- Shoulder_plane sameAs Зензубель.
- Shoulder_plane sameAs Q838095.
- Shoulder_plane wasDerivedFrom Shoulder_plane?oldid=672905861.
- Shoulder_plane depiction BullnoseShoulderPlane.jpg.
- Shoulder_plane isPrimaryTopicOf Shoulder_plane.