Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Saltillo_tile> ?p ?o }
Showing triples 1 to 53 of
53
with 100 triples per page.
- Saltillo_tile abstract "Saltillo tile is a type of terra-cotta tile that originates in Saltillo, Coahuila, Mexico. It is one of the two most famous products of the city, the other being multi-coloured woven sarapes so typical of the region. Saltillo-type tiles are now manufactured at many places in Mexico, and high-fire \"Saltillo look\" tiles, many from Italy, compete with the terra-cotta originalsSaltillo tile vary in colour and shape, but the majority range from in varying hues of reds, oranges and yellows. Tiles are shaped either by pressing quarried clay with a wooden frame (super), or carving out the desired shape (regular). Depending on the raw tile's placement among other tiles at the time of firing, its colour ranges from yellow to a rich orange.\t \tSaltillo tile is highly porous, and soaks in liquid easily. Unlike most ceramic tile, there is no glaze on the top surface of the tile. It is difficult to install as it absorbs water from the thin-set mortar, grout, grease pencils, etc. Once placed, it stains and scuffs easily if not properly sealed and maintained with a quality sealant. Saltillo is probably a poor choice for outdoor installation in freeze-thaw climates, although is a popular choice in warmer climates. During installation the tiles should be handled carefully to avoid stains that can even occur from body oils on the installer's hands.\t \tPreferred methods for installation invariably relate to its propensity for soaking in liquid. One method involves soaking the tile in water, setting the tile with thin-set mortar, grouting, then sealing both the saltillo and the grout with a quality surface sealant. However, using this method may cause the grout to stick to the surface of the saltillo tile, making it impossible to remove. This method is NOT recommended for do-it-yourselfers.Another method involves soaking the tile, setting the tile then allowing it to dry, sealing the tile, then grouting. This method prevents the grout from sticking to the tile.You might ask if it's possible to seal just the top of the tile before setting...the problem is that soaking the tile allows it to bond more strongly with the mortar, and you probably don't want to seal the tile, then soak it in water.A penetrating sealant will maintain the natural look of the tile. You should periodically test the seal by putting a few drops of water on the tile in various places. If the water is absorbed, then another coat of sealant should be applied.Other surface sealants may give the tile a shiny appearance. As the tile loses its shine, another coat is applied on top of the old sealant. If the finish becomes too worn or uneven, it can be stripped and a new coat applied. However this option is very labor-intensive.Additionally, another coat of sealant can be used on both the saltillo tile and grout.\tAlthough inexpensive itself, saltillo is very expensive to have installed. A professional with experience in saltillo will charge $4.50 to $6.00 per square foot for installation, depending on your locale.Treatments for saltillo include: coating them with a surface sealant prior to grouting (as mentioned earlier), applying an admixture of linseed oil and paint thinner, applying natural stone colour enhancers, applying floor hardeners, applying shine, painting them with a water-based paint, coating them with wood stain, etc. As the tile is incredibly porous it will readily absorb just about any liquid. Please note any of these treatments may be used on the tile, however some of them such as penetrating sealeant, enhancers or linseed oil treatments penetrate into the tile and may affect the ability of later coatings to adhere to the tile. Ultra-durable, water-based polyurethane makes an excellent coating for adding slip resistance, beautiful appearance and protection from penetrating stains. Look for a polyurethane coating that has no VOCs for maximum environmental friendliness.\tSaltillo tile may be sealed with a penetrating sealant or a film forming sealant (coating). A film forming sealant will leave a film on the surface of the tile. With multiple coats the film will build an even protective film and gloss that may repel water, oil, grease and efflorescence. A quality acrylic sealant should be used as it will be easy to apply, non-yellowing and long lasting. A quality acrylic floor polish can be applied over the sealed surface for added abrasion and wear protection.The finished sealed floor should be maintained for best results. For routine cleaning use a neutral cleaner to damp mop the floor (never flood the sealed floor with water). Reapply the polish if areas begin to show wear over time. Maintaining the sealant/polish will greatly extend the life of the sealant and minimize repair needs.".
- Saltillo_tile wikiPageID "1585142".
- Saltillo_tile wikiPageLength "5416".
- Saltillo_tile wikiPageOutDegree "29".
- Saltillo_tile wikiPageRevisionID "641418958".
- Saltillo_tile wikiPageWikiLink Acrylic_resin.
- Saltillo_tile wikiPageWikiLink Category:Building_materials.
- Saltillo_tile wikiPageWikiLink Category:Floors.
- Saltillo_tile wikiPageWikiLink Category:Masonry.
- Saltillo_tile wikiPageWikiLink Category:Pavements.
- Saltillo_tile wikiPageWikiLink Category:Terracotta.
- Saltillo_tile wikiPageWikiLink Ceramic_glaze.
- Saltillo_tile wikiPageWikiLink Clay.
- Saltillo_tile wikiPageWikiLink Coahuila.
- Saltillo_tile wikiPageWikiLink Do_it_yourself.
- Saltillo_tile wikiPageWikiLink Grease_pencil.
- Saltillo_tile wikiPageWikiLink Grout.
- Saltillo_tile wikiPageWikiLink Linseed_oil.
- Saltillo_tile wikiPageWikiLink Mexico.
- Saltillo_tile wikiPageWikiLink Mortar_(masonry).
- Saltillo_tile wikiPageWikiLink Paint.
- Saltillo_tile wikiPageWikiLink Paint_thinner.
- Saltillo_tile wikiPageWikiLink Polyurethane.
- Saltillo_tile wikiPageWikiLink Porosity.
- Saltillo_tile wikiPageWikiLink Saltillo.
- Saltillo_tile wikiPageWikiLink Sealant.
- Saltillo_tile wikiPageWikiLink Serape.
- Saltillo_tile wikiPageWikiLink Sorption.
- Saltillo_tile wikiPageWikiLink Terracotta.
- Saltillo_tile wikiPageWikiLink Tile.
- Saltillo_tile wikiPageWikiLink Volatile_organic_compound.
- Saltillo_tile wikiPageWikiLink Wood_stain.
- Saltillo_tile wikiPageWikiLinkText "Saltillo tile".
- Saltillo_tile wikiPageUsesTemplate Template:Howto.
- Saltillo_tile wikiPageUsesTemplate Template:Multiple_issues.
- Saltillo_tile wikiPageUsesTemplate Template:Refimprove.
- Saltillo_tile wikiPageUsesTemplate Template:Reflist.
- Saltillo_tile subject Category:Building_materials.
- Saltillo_tile subject Category:Floors.
- Saltillo_tile subject Category:Masonry.
- Saltillo_tile subject Category:Pavements.
- Saltillo_tile subject Category:Terracotta.
- Saltillo_tile hypernym Tile.
- Saltillo_tile type Software.
- Saltillo_tile type Element.
- Saltillo_tile type Page.
- Saltillo_tile comment "Saltillo tile is a type of terra-cotta tile that originates in Saltillo, Coahuila, Mexico. It is one of the two most famous products of the city, the other being multi-coloured woven sarapes so typical of the region. Saltillo-type tiles are now manufactured at many places in Mexico, and high-fire \"Saltillo look\" tiles, many from Italy, compete with the terra-cotta originalsSaltillo tile vary in colour and shape, but the majority range from in varying hues of reds, oranges and yellows.".
- Saltillo_tile label "Saltillo tile".
- Saltillo_tile sameAs Q7406128.
- Saltillo_tile sameAs m.05df98.
- Saltillo_tile sameAs Q7406128.
- Saltillo_tile wasDerivedFrom Saltillo_tile?oldid=641418958.
- Saltillo_tile isPrimaryTopicOf Saltillo_tile.