Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/SHV_connector> ?p ?o }
Showing triples 1 to 37 of
37
with 100 triples per page.
- SHV_connector abstract "The SHV (safe high voltage) connector is a type of RF connector used for terminating a coaxial cable. The connector uses a bayonet mount similar to those of the BNC and MHV connectors, but is easily distinguished due to its very thick and protruding insulator. This insulation geometry makes SHV connectors safer for handling high voltage than MHV connectors, by preventing accidental contact with the live conductor in an unmated connector or plug. The connector is also designed such that when it is being disconnected from a plug, the high voltage contact is broken before the ground contact, to prevent accidental shocks. The connector is also designed to prevent users from forcing a high voltage connector into a low voltage plug or vice versa, as can happen with MHV and BNC connectors.SHV connectors are used in laboratory settings for voltages and currents beyond the capacity of BNC and MHV connectors. Standard SHV connectors are rated for 5000 volts DC and 5 amperes, although higher-voltage versions (to 20 kV) are also available. SHV connectors are not as common as the older MHV type.A common usage of these connectors is for Geiger-Müller tube detectors.".
- SHV_connector wikiPageID "9740654".
- SHV_connector wikiPageLength "1446".
- SHV_connector wikiPageOutDegree "14".
- SHV_connector wikiPageRevisionID "613120006".
- SHV_connector wikiPageWikiLink Ampere.
- SHV_connector wikiPageWikiLink BNC_connector.
- SHV_connector wikiPageWikiLink Bayonet_mount.
- SHV_connector wikiPageWikiLink Category:Coaxial_connectors.
- SHV_connector wikiPageWikiLink Coaxial_cable.
- SHV_connector wikiPageWikiLink Direct_current.
- SHV_connector wikiPageWikiLink Electric_current.
- SHV_connector wikiPageWikiLink Geiger–Müller_tube.
- SHV_connector wikiPageWikiLink High_voltage.
- SHV_connector wikiPageWikiLink Laboratory.
- SHV_connector wikiPageWikiLink MHV_connector.
- SHV_connector wikiPageWikiLink RF_connector.
- SHV_connector wikiPageWikiLink Volt.
- SHV_connector wikiPageWikiLink Voltage.
- SHV_connector wikiPageWikiLinkText "SHV connector".
- SHV_connector wikiPageWikiLinkText "SHV".
- SHV_connector wikiPageUsesTemplate Template:Electrical-connector-stub.
- SHV_connector wikiPageUsesTemplate Template:RF_connectors.
- SHV_connector wikiPageUsesTemplate Template:Unreferenced.
- SHV_connector subject Category:Coaxial_connectors.
- SHV_connector hypernym Connector.
- SHV_connector type Road.
- SHV_connector type Connector.
- SHV_connector type Redirect.
- SHV_connector comment "The SHV (safe high voltage) connector is a type of RF connector used for terminating a coaxial cable. The connector uses a bayonet mount similar to those of the BNC and MHV connectors, but is easily distinguished due to its very thick and protruding insulator. This insulation geometry makes SHV connectors safer for handling high voltage than MHV connectors, by preventing accidental contact with the live conductor in an unmated connector or plug.".
- SHV_connector label "SHV connector".
- SHV_connector sameAs Q7390238.
- SHV_connector sameAs SHVコネクタ.
- SHV_connector sameAs m.02pqs0b.
- SHV_connector sameAs Q7390238.
- SHV_connector wasDerivedFrom SHV_connector?oldid=613120006.
- SHV_connector isPrimaryTopicOf SHV_connector.