Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Resaw> ?p ?o }
Showing triples 1 to 35 of
35
with 100 triples per page.
- Resaw abstract "A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf to minimize waste. Resaw blades of up to 1 inch (26 mm) may be fitted to a standard band saw. Many small and medium-sized sawmills use 1- to 1 1⁄2-inch band saw blades. Manufacturers of these blades are Wood-Mizer, Dakin-Flathers, Lenox Saw, Edge Manufacturing & Munkforsagar, Ro-Ma Cutting Tools.Timber mills use larger resaws to rip large planks into smaller sizes. A typical mill sized resaw is eight inches wide and made with 16 gauge steel. Resaw blades can be identified by their straight back, as opposed to headsaws and doublecut blades, which have notched or toothed backs.".
- Resaw thumbnail Band_saw_blades.jpg?width=300.
- Resaw wikiPageID "9653746".
- Resaw wikiPageLength "1160".
- Resaw wikiPageOutDegree "8".
- Resaw wikiPageRevisionID "644010360".
- Resaw wikiPageWikiLink Bandsaw.
- Resaw wikiPageWikiLink Category:Sawmill_technology.
- Resaw wikiPageWikiLink Category:Saws.
- Resaw wikiPageWikiLink Head_saw.
- Resaw wikiPageWikiLink Sawmill.
- Resaw wikiPageWikiLink Wikt:kerf.
- Resaw wikiPageWikiLink Wood_veneer.
- Resaw wikiPageWikiLink File:Band_saw_blades.jpg.
- Resaw wikiPageWikiLinkText "Resaw".
- Resaw wikiPageWikiLinkText "resaw".
- Resaw wikiPageUsesTemplate Template:Forestry-stub.
- Resaw wikiPageUsesTemplate Template:Forestry_tools.
- Resaw wikiPageUsesTemplate Template:Frac.
- Resaw wikiPageUsesTemplate Template:Reflist.
- Resaw wikiPageUsesTemplate Template:Tool-stub.
- Resaw wikiPageUsesTemplate Template:Unreferenced.
- Resaw subject Category:Sawmill_technology.
- Resaw subject Category:Saws.
- Resaw hypernym Band.
- Resaw type Band.
- Resaw type Tool.
- Resaw comment "A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf to minimize waste. Resaw blades of up to 1 inch (26 mm) may be fitted to a standard band saw. Many small and medium-sized sawmills use 1- to 1 1⁄2-inch band saw blades.".
- Resaw label "Resaw".
- Resaw sameAs Q7314941.
- Resaw sameAs m.02pn7_d.
- Resaw sameAs Q7314941.
- Resaw wasDerivedFrom Resaw?oldid=644010360.
- Resaw depiction Band_saw_blades.jpg.
- Resaw isPrimaryTopicOf Resaw.