Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/RapidCAD> ?p ?o }
Showing triples 1 to 30 of
30
with 100 triples per page.
- RapidCAD abstract "RapidCAD is a specially packaged Intel 486DX and a dummy floating point unit (FPU) designed as pin-compatible replacements for an Intel 80386 processor and 80387 FPU. Because the i486DX has a working on-chip FPU, a dummy FPU package is supplied to go in the Intel 387 FPU socket. The dummy FPU is used to provide the FERR signal, necessary for compatibility purposes.Despite being able to execute instructions in the same number of cycles as an i486DX, integer performance on RapidCAD suffers due to the absence of level 1 cache and the bottleneck of the 386 bus. RapidCAD offers minimal improvement in integer performance over a 386DX (typically 10%, at most 35%), but provides substantial improvement in floating point operations (up to 80% faster) for which it was marketed. Floating point performance is mostly improved by moving the FPU onto the CPU core.".
- RapidCAD wikiPageExternalLink RAPIDCAD.html.
- RapidCAD wikiPageExternalLink intelrapidcad.html.
- RapidCAD wikiPageID "1078214".
- RapidCAD wikiPageLength "1746".
- RapidCAD wikiPageOutDegree "8".
- RapidCAD wikiPageRevisionID "682725774".
- RapidCAD wikiPageWikiLink Category:Intel_x86_microprocessors.
- RapidCAD wikiPageWikiLink Floating-point_unit.
- RapidCAD wikiPageWikiLink Intel_80386.
- RapidCAD wikiPageWikiLink Intel_80486.
- RapidCAD wikiPageWikiLink Intel_80486_OverDrive.
- RapidCAD wikiPageWikiLink Pentium_OverDrive.
- RapidCAD wikiPageWikiLink X87.
- RapidCAD wikiPageWikiLinkText "Intel RapidCAD".
- RapidCAD wikiPageWikiLinkText "RapidCAD".
- RapidCAD wikiPageUsesTemplate Template:Citation_needed.
- RapidCAD wikiPageUsesTemplate Template:De_icon.
- RapidCAD wikiPageUsesTemplate Template:FOLDOC.
- RapidCAD wikiPageUsesTemplate Template:Intel_processors.
- RapidCAD subject Category:Intel_x86_microprocessors.
- RapidCAD comment "RapidCAD is a specially packaged Intel 486DX and a dummy floating point unit (FPU) designed as pin-compatible replacements for an Intel 80386 processor and 80387 FPU. Because the i486DX has a working on-chip FPU, a dummy FPU package is supplied to go in the Intel 387 FPU socket.".
- RapidCAD label "RapidCAD".
- RapidCAD sameAs Q1184649.
- RapidCAD sameAs Intel_RapidCAD.
- RapidCAD sameAs m.0441q6.
- RapidCAD sameAs Intel_RapidCad.
- RapidCAD sameAs Q1184649.
- RapidCAD wasDerivedFrom RapidCAD?oldid=682725774.
- RapidCAD isPrimaryTopicOf RapidCAD.