Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Fit_(manufacturing)> ?p ?o }
Showing triples 1 to 29 of
29
with 100 triples per page.
- Fit_(manufacturing) abstract "In precision mechanics, fit refers to the degree of 'looseness' with which an shaft is inserted into an orifice.This coupling is related to the tolerance or allowance of both parts dimensions. The shaft and the orifice must be of a similar diameter, otherwise there will not be a correct adjustment. With this in mind, measurements have been internationally standarised according to ISO regulation to ensure the interchangeability of items and their mass production.Tolerance values are designated with a capital letter in the case of orificies and lower case letters in the case of shafts. The lower the value the higher the machining costs, as a greater precision is required.".
- Fit_(manufacturing) wikiPageID "33942432".
- Fit_(manufacturing) wikiPageLength "10132".
- Fit_(manufacturing) wikiPageOutDegree "10".
- Fit_(manufacturing) wikiPageRevisionID "661045061".
- Fit_(manufacturing) wikiPageWikiLink Category:Mechanics.
- Fit_(manufacturing) wikiPageWikiLink Engineering_tolerance.
- Fit_(manufacturing) wikiPageWikiLink Interchangeable_parts.
- Fit_(manufacturing) wikiPageWikiLink International_Organization_for_Standardization.
- Fit_(manufacturing) wikiPageWikiLink Machining.
- Fit_(manufacturing) wikiPageWikiLink Precision_mechanics.
- Fit_(manufacturing) wikiPageWikiLink Shaft.
- Fit_(manufacturing) wikiPageWikiLink Upper_and_lower_bounds.
- Fit_(manufacturing) wikiPageWikiLink Wikt:orifice.
- Fit_(manufacturing) wikiPageWikiLinkText "sliding fit".
- Fit_(manufacturing) wikiPageUsesTemplate Template:Multiple_issues.
- Fit_(manufacturing) wikiPageUsesTemplate Template:Orphan.
- Fit_(manufacturing) wikiPageUsesTemplate Template:Unreferenced.
- Fit_(manufacturing) subject Category:Mechanics.
- Fit_(manufacturing) type Mechanic.
- Fit_(manufacturing) type Physic.
- Fit_(manufacturing) comment "In precision mechanics, fit refers to the degree of 'looseness' with which an shaft is inserted into an orifice.This coupling is related to the tolerance or allowance of both parts dimensions. The shaft and the orifice must be of a similar diameter, otherwise there will not be a correct adjustment.".
- Fit_(manufacturing) label "Fit (manufacturing)".
- Fit_(manufacturing) sameAs Q8365495.
- Fit_(manufacturing) sameAs التوافق_(تصنيع).
- Fit_(manufacturing) sameAs m.0hn99bf.
- Fit_(manufacturing) sameAs Q8365495.
- Fit_(manufacturing) wasDerivedFrom Fit_(manufacturing)?oldid=661045061.
- Fit_(manufacturing) isPrimaryTopicOf Fit_(manufacturing).