Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Die_head> ?p ?o }
Showing triples 1 to 33 of
33
with 100 triples per page.
- Die_head abstract "A die head is a threading die that is used in the high volume production of threaded components.Die heads are commonly used on lathes, turret lathes, screw machines and CNC lathes. They may be used for either cutting a thread or rolling a thread. They may also be used for internal or external thread cutting.In operation, there are usually four moveable chasers that cut the thread then back away from the work to permit rapid removal of the tool. The lower picture at the right shows four sets of chasers. Each set of chasers is designed to cut a different thread. One set of chasers would be used at a time, each chaser is inserted into the die head (in the correct order) and the die head is closed bringing the chasers down to their cutting position. When sufficient length of thread has been cut the die head will open allowing for rapid retraction of the head without interference with the newly formed thread.The die head shown cuts an outside thread. There are also collapsible die heads that are used to cut an internal thread.The bottom picture shows a Die Head used for Thread Rolling. A Rolled Thread may have greater strength than a cut thread, though it usually requires more energy to roll a thread than cut one.".
- Die_head thumbnail Die_head.jpg?width=300.
- Die_head wikiPageExternalLink books?id=LLY5AAAAMAAJ&q=Group+of+Hartness+Automatic+Dies.
- Die_head wikiPageID "3091206".
- Die_head wikiPageLength "2089".
- Die_head wikiPageOutDegree "10".
- Die_head wikiPageRevisionID "585973309".
- Die_head wikiPageWikiLink Automatic_lathe.
- Die_head wikiPageWikiLink Category:Threading_(manufacturing).
- Die_head wikiPageWikiLink File:Die_Head_for_Thread_Rolling.jpg.
- Die_head wikiPageWikiLink File:Die_head.jpg.
- Die_head wikiPageWikiLink Metal_lathe.
- Die_head wikiPageWikiLink Screw_thread.
- Die_head wikiPageWikiLink Tap_and_die.
- Die_head wikiPageWikiLink File:Die_head_and_dies.jpg.
- Die_head wikiPageWikiLinkText "Die head".
- Die_head wikiPageWikiLinkText "die head".
- Die_head wikiPageUsesTemplate Template:Cite_book.
- Die_head wikiPageUsesTemplate Template:Metalworking_navbox.
- Die_head wikiPageUsesTemplate Template:Unreferenced.
- Die_head subject Category:Threading_(manufacturing).
- Die_head hypernym Die.
- Die_head type Redirect.
- Die_head type Tool.
- Die_head comment "A die head is a threading die that is used in the high volume production of threaded components.Die heads are commonly used on lathes, turret lathes, screw machines and CNC lathes. They may be used for either cutting a thread or rolling a thread. They may also be used for internal or external thread cutting.In operation, there are usually four moveable chasers that cut the thread then back away from the work to permit rapid removal of the tool.".
- Die_head label "Die head".
- Die_head sameAs Q5274489.
- Die_head sameAs حدیدهگیر.
- Die_head sameAs m.08qtmt.
- Die_head sameAs Q5274489.
- Die_head wasDerivedFrom Die_head?oldid=585973309.
- Die_head depiction Die_head.jpg.
- Die_head isPrimaryTopicOf Die_head.
