Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Collet> ?p ?o }
Showing triples 1 to 79 of
79
with 100 triples per page.
- Collet abstract "A collet /ˈkɒlᵻt/ is a holding device—specifically, a subtype of chuck—that forms a collar around the object to be held and exerts a strong clamping force on the object when it is tightened, usually by means of a tapered outer collar. It may be used to hold a workpiece or a tool.An external collet is a sleeve with a (normally) cylindrical inner surface and a conical outer surface. The collet can be squeezed against a matching taper such that its inner surface contracts to a slightly smaller diameter, squeezing the tool or workpiece whose secure holding is desired. Most often this is achieved with a spring collet, made of spring steel, with one or more kerf cuts along its length to allow it to expand and contract. An alternative collet design is one that has several tapered steel blocks (essentially tapered gauge blocks) held in circular position (like the points of a star, or indeed the jaws of a jawed chuck) by a flexible binding medium (typically synthetic or natural rubber). The Jacobs Rubber-Flex brand is a name that most machinists would recognize for this type of collet chuck system. Regardless of the collet design, the operating principle is the same: squeeze the collet against the tool or workpiece to be held, resulting in high static friction. Under correct conditions, it holds quite securely.An internal collet can be used to lock two telescoping tubes together. In this case the collet is in the form of a truncated cone drilled and threaded down the centreline. The collet diameter matches the bore of the inner tube, having the larger end slightly greater than the bore while the smaller diameter is slightly less than the bore. A threaded stud, anchored at its other end to the tube, is then used to pull the collet into the tube. The increasing diameter of the collet forces the inner tube to expand and be pushed against the inner wall of the outer tube thus locking the two tubes together. The inner tube is often slotted to facilitate this expansion.".
- Collet thumbnail HardingeR8Collets.jpg?width=300.
- Collet wikiPageExternalLink books?id=6UFhomTE8KYC.
- Collet wikiPageExternalLink 020404.html.
- Collet wikiPageExternalLink 050203.html.
- Collet wikiPageID "1553609".
- Collet wikiPageLength "14127".
- Collet wikiPageOutDegree "42".
- Collet wikiPageRevisionID "700379128".
- Collet wikiPageWikiLink Bridgeport_(machine_tool_brand).
- Collet wikiPageWikiLink Capital_cost.
- Collet wikiPageWikiLink Category:Lathes.
- Collet wikiPageWikiLink Category:Machine_tools.
- Collet wikiPageWikiLink Category:Woodworking_clamps.
- Collet wikiPageWikiLink Chuck_(engineering).
- Collet wikiPageWikiLink Cone.
- Collet wikiPageWikiLink Cylinder_(geometry).
- Collet wikiPageWikiLink Die_(integrated_circuit).
- Collet wikiPageWikiLink Die_collet.
- Collet wikiPageWikiLink Die_preparation.
- Collet wikiPageWikiLink Dremel.
- Collet wikiPageWikiLink Friction.
- Collet wikiPageWikiLink Gauge_block.
- Collet wikiPageWikiLink Lathe.
- Collet wikiPageWikiLink Machine_taper.
- Collet wikiPageWikiLink Mandrel.
- Collet wikiPageWikiLink Milling_(machining).
- Collet wikiPageWikiLink Natural_rubber.
- Collet wikiPageWikiLink Router_(woodworking).
- Collet wikiPageWikiLink Run-out.
- Collet wikiPageWikiLink Semiconductor.
- Collet wikiPageWikiLink Spring_steel.
- Collet wikiPageWikiLink Star_polygon.
- Collet wikiPageWikiLink Synthetic_rubber.
- Collet wikiPageWikiLink Wafer_(electronics).
- Collet wikiPageWikiLink Wikt:collar.
- Collet wikiPageWikiLink Wikt:kerf.
- Collet wikiPageWikiLink Wire_bonding.
- Collet wikiPageWikiLink Woodworking.
- Collet wikiPageWikiLink Wrench.
- Collet wikiPageWikiLink X-Acto.
- Collet wikiPageWikiLink File:HardingeR8Collets.jpg.
- Collet wikiPageWikiLink File:MachineColletExamples.jpg.
- Collet wikiPageWikiLinkText "Collet".
- Collet wikiPageWikiLinkText "collet chuck".
- Collet wikiPageWikiLinkText "collet".
- Collet wikiPageUsesTemplate Template:Citation.
- Collet wikiPageUsesTemplate Template:Convert.
- Collet wikiPageUsesTemplate Template:IPAc-en.
- Collet wikiPageUsesTemplate Template:Maybe.
- Collet wikiPageUsesTemplate Template:Metalworking_navbox.
- Collet wikiPageUsesTemplate Template:No.
- Collet wikiPageUsesTemplate Template:Other_uses.
- Collet wikiPageUsesTemplate Template:Refimprove.
- Collet wikiPageUsesTemplate Template:Reflist.
- Collet wikiPageUsesTemplate Template:Yes.
- Collet subject Category:Lathes.
- Collet subject Category:Machine_tools.
- Collet subject Category:Woodworking_clamps.
- Collet type Machine.
- Collet type Tool.
- Collet comment "A collet /ˈkɒlᵻt/ is a holding device—specifically, a subtype of chuck—that forms a collar around the object to be held and exerts a strong clamping force on the object when it is tightened, usually by means of a tapered outer collar. It may be used to hold a workpiece or a tool.An external collet is a sleeve with a (normally) cylindrical inner surface and a conical outer surface.".
- Collet label "Collet".
- Collet sameAs Q1668211.
- Collet sameAs Цанга.
- Collet sameAs Цанга.
- Collet sameAs Category:Collet_chucks.
- Collet sameAs Kleština.
- Collet sameAs Spannzange.
- Collet sameAs Ցանգ.
- Collet sameAs Цанга.
- Collet sameAs m.059wy8.
- Collet sameAs Цанга.
- Collet sameAs Цанга.
- Collet sameAs Q1668211.
- Collet sameAs 筒夾.
- Collet wasDerivedFrom Collet?oldid=700379128.
- Collet depiction HardingeR8Collets.jpg.
- Collet isPrimaryTopicOf Collet.