Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/CNC_plunge_milling> ?p ?o }
Showing triples 1 to 19 of
19
with 100 triples per page.
- CNC_plunge_milling abstract "CNC plunge milling is sometimes called z-axis milling also. In this process, the feed is provided linearly along the tool axis while doing CNC processing. Plunge milling is very good method for rough machining process of complex shape or free form shapes like impeller parts. In multi axis plunge milling, the optimization of plunge cutter section selection and generating the tool path for free form surface is very important to improve the efficiency and effectiveness. In plunge milling, after each plunge the milling cutter is offset by some value and then the material surface is removed in the form of lunula. The material removal rate is computed by area of lunula and the feed rate. At the entry and exit of milling cutter, the radial offset has not any influence on the condition of surface. At the maximum cutting velocity, the surface obtained is clean whatever the feed rate per tooth on entry but on exit the high value of feed rate gives the deteriorated surface. The surface roughness value always increases with feed rate in plunge milling.The simulation of dynamic uncut chip thickness which is generated by plunge milling can be done by tracking the position of plunge cutter center. This simulation shows the regenerative effect with variation of phase difference. Then the model of uncut chip thickness and cutting force coefficient with cutting edge radius are entered into time domain model. Finally, with the help of time domain solution the stability of machine and vibrations are estimated.The cutting parameters play a key role in plunge milling. The cutting force and machine stability both are influenced by machining parameters. Frequency domain model can be used to estimate the machining stability.".
- CNC_plunge_milling thumbnail Plunge_milling.jpg?width=300.
- CNC_plunge_milling wikiPageID "45687154".
- CNC_plunge_milling wikiPageLength "5142".
- CNC_plunge_milling wikiPageOutDegree "4".
- CNC_plunge_milling wikiPageRevisionID "703919815".
- CNC_plunge_milling wikiPageWikiLink Category:Computer-aided_engineering.
- CNC_plunge_milling wikiPageWikiLink Milling_(machining).
- CNC_plunge_milling wikiPageWikiLink Numerical_control.
- CNC_plunge_milling wikiPageWikiLink File:Plunge_milling.jpg.
- CNC_plunge_milling wikiPageUsesTemplate Template:About.
- CNC_plunge_milling wikiPageUsesTemplate Template:Reflist.
- CNC_plunge_milling subject Category:Computer-aided_engineering.
- CNC_plunge_milling comment "CNC plunge milling is sometimes called z-axis milling also. In this process, the feed is provided linearly along the tool axis while doing CNC processing. Plunge milling is very good method for rough machining process of complex shape or free form shapes like impeller parts. In multi axis plunge milling, the optimization of plunge cutter section selection and generating the tool path for free form surface is very important to improve the efficiency and effectiveness.".
- CNC_plunge_milling label "CNC plunge milling".
- CNC_plunge_milling sameAs m.0130fh1s.
- CNC_plunge_milling wasDerivedFrom CNC_plunge_milling?oldid=703919815.
- CNC_plunge_milling depiction Plunge_milling.jpg.
- CNC_plunge_milling isPrimaryTopicOf CNC_plunge_milling.