Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/British_Standard_Brass> ?p ?o }
Showing triples 1 to 34 of
34
with 100 triples per page.
- British_Standard_Brass abstract "British Standard Brass or British Brass Thread is an imperial unit based screw thread. It adopts the Whitworth thread form with a pitch of 26 threads per inch and a thread angle of 55 degrees for all diameters. It is often wrongly called British Standard Brass but is not actually covered by a British Standard.The reason for adopting 26 tpi, is brass tube has a relatively similar wall thickness irrespective of the outside diameter of the tube, therefore as BSW thread depths are determined by the threads per inch, a lower tpi would reduce the strength of the tube or cut right through it. Brass tube threads can be confused with the British Standard Cycle thread, one of which that is most common is also 26 tpi. The difference being the thread angle of the British Standard Cycle is the same as the metric thread angle of 60 degrees. Nominal sizes are usually in the range 1⁄8 to 2 inches.".
- British_Standard_Brass wikiPageID "5153334".
- British_Standard_Brass wikiPageLength "1416".
- British_Standard_Brass wikiPageOutDegree "13".
- British_Standard_Brass wikiPageRevisionID "687637071".
- British_Standard_Brass wikiPageWikiLink British_Standard_Pipe.
- British_Standard_Brass wikiPageWikiLink British_Standard_Whitworth.
- British_Standard_Brass wikiPageWikiLink British_Standards.
- British_Standard_Brass wikiPageWikiLink Category:Mechanical_standards.
- British_Standard_Brass wikiPageWikiLink Category:Screws.
- British_Standard_Brass wikiPageWikiLink Category:Threading_(manufacturing).
- British_Standard_Brass wikiPageWikiLink Imperial_units.
- British_Standard_Brass wikiPageWikiLink National_pipe_thread.
- British_Standard_Brass wikiPageWikiLink Nominal_size.
- British_Standard_Brass wikiPageWikiLink Screw_thread.
- British_Standard_Brass wikiPageWikiLink Unified_Thread_Standard.
- British_Standard_Brass wikiPageWikiLinkText "British Standard Brass".
- British_Standard_Brass wikiPageUsesTemplate Template:Frac.
- British_Standard_Brass wikiPageUsesTemplate Template:Reflist.
- British_Standard_Brass subject Category:Mechanical_standards.
- British_Standard_Brass subject Category:Screws.
- British_Standard_Brass subject Category:Threading_(manufacturing).
- British_Standard_Brass hypernym Unit.
- British_Standard_Brass type Organisation.
- British_Standard_Brass type Fastener.
- British_Standard_Brass type Redirect.
- British_Standard_Brass type Tool.
- British_Standard_Brass comment "British Standard Brass or British Brass Thread is an imperial unit based screw thread. It adopts the Whitworth thread form with a pitch of 26 threads per inch and a thread angle of 55 degrees for all diameters.".
- British_Standard_Brass label "British Standard Brass".
- British_Standard_Brass sameAs Q4971096.
- British_Standard_Brass sameAs m.0d57km.
- British_Standard_Brass sameAs Q4971096.
- British_Standard_Brass wasDerivedFrom British_Standard_Brass?oldid=687637071.
- British_Standard_Brass isPrimaryTopicOf British_Standard_Brass.