Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Bored_cylindrical_lock> ?p ?o }
Showing triples 1 to 27 of
27
with 100 triples per page.
- Bored_cylindrical_lock abstract "A bored cylindrical lock is one in which two holes are bored, perpendicular to one another, into the door. A large hole is bored into the door face and a smaller crossbore hole is bored into the door edge, as opposed to a mortise lock prep cut into the edge of the door. Typically, the face hole is sized from 1.5 inches to 2.125 inches (3.8 to 5.4 cm) and is centered at 2.375 inches or 2.75 inches (6.0 cm or 7.0 cm) from the leading edge of the door, this distance is referred to as the backset. Other, less popular, backsets are at 3.75 and 5 inches (9.5 and 12.7 cm). Residential doors are normally prepared for a 2.375 inch (6.0 cm) backset and commercial doors at a 2.75 inch (7 cm) backset.".
- Bored_cylindrical_lock wikiPageID "904341".
- Bored_cylindrical_lock wikiPageLength "2186".
- Bored_cylindrical_lock wikiPageOutDegree "7".
- Bored_cylindrical_lock wikiPageRevisionID "703488197".
- Bored_cylindrical_lock wikiPageWikiLink Category:Locks_(security_device).
- Bored_cylindrical_lock wikiPageWikiLink Door.
- Bored_cylindrical_lock wikiPageWikiLink Lock_(security_device).
- Bored_cylindrical_lock wikiPageWikiLink Mortise_lock.
- Bored_cylindrical_lock wikiPageWikiLink Walter_Schlage.
- Bored_cylindrical_lock wikiPageWikiLink File:Electronic_lock_yl88.jpg.
- Bored_cylindrical_lock wikiPageWikiLink File:Mis_fotos_de_celular_019.jpg.
- Bored_cylindrical_lock wikiPageWikiLinkText "bored cylindrical lock".
- Bored_cylindrical_lock wikiPageUsesTemplate Template:Citation_needed.
- Bored_cylindrical_lock wikiPageUsesTemplate Template:Confusing.
- Bored_cylindrical_lock wikiPageUsesTemplate Template:Locksmithing.
- Bored_cylindrical_lock wikiPageUsesTemplate Template:Refimprove.
- Bored_cylindrical_lock wikiPageUsesTemplate Template:Reflist.
- Bored_cylindrical_lock wikiPageUsesTemplate Template:Tech-stub.
- Bored_cylindrical_lock subject Category:Locks_(security_device).
- Bored_cylindrical_lock comment "A bored cylindrical lock is one in which two holes are bored, perpendicular to one another, into the door. A large hole is bored into the door face and a smaller crossbore hole is bored into the door edge, as opposed to a mortise lock prep cut into the edge of the door. Typically, the face hole is sized from 1.5 inches to 2.125 inches (3.8 to 5.4 cm) and is centered at 2.375 inches or 2.75 inches (6.0 cm or 7.0 cm) from the leading edge of the door, this distance is referred to as the backset.".
- Bored_cylindrical_lock label "Bored cylindrical lock".
- Bored_cylindrical_lock sameAs Q4944820.
- Bored_cylindrical_lock sameAs m.03nj51.
- Bored_cylindrical_lock sameAs Q4944820.
- Bored_cylindrical_lock wasDerivedFrom Bored_cylindrical_lock?oldid=703488197.
- Bored_cylindrical_lock isPrimaryTopicOf Bored_cylindrical_lock.