Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Ball_spline> ?p ?o }
Showing triples 1 to 28 of
28
with 100 triples per page.
- Ball_spline abstract "Ball splines (Ball Spline bearings) are a special type of linear motion bearing that are used to provide nearly frictionless linear motion while allowing the member to transmit torque simultaneously. There are grooves ground along the length of the shaft (thus forming splines) for the recirculating ground balls to run inside. The outer shell that houses the balls is called a nut rather than a bushing, but is not a nut in the traditional sense—it is not free to rotate about the shaft, but is free to travel up and down the shaft. By increasing the contact area of the ball bearings on the shaft to approximately 45 degrees, the side load and direct load carrying capabilities are greatly increased. Each nut can be individually preloaded at the factory to decrease the available radial play to ensure rigidity. This process not only increases the contact area, increasing direct loading capabilities, but it also restricts any radial movement, increasing the overhung moment capabilities. This creates a sturdier structure that can handle a very strenuous working environment.".
- Ball_spline wikiPageID "11538102".
- Ball_spline wikiPageLength "1375".
- Ball_spline wikiPageOutDegree "9".
- Ball_spline wikiPageRevisionID "685262311".
- Ball_spline wikiPageWikiLink Ball_bearing.
- Ball_spline wikiPageWikiLink Ball_screw.
- Ball_spline wikiPageWikiLink Bearing_(mechanical).
- Ball_spline wikiPageWikiLink Category:Bearings_(mechanical).
- Ball_spline wikiPageWikiLink Groove_(engineering).
- Ball_spline wikiPageWikiLink Linear-motion_bearing.
- Ball_spline wikiPageWikiLink Plain_bearing.
- Ball_spline wikiPageWikiLink Preload_(engineering).
- Ball_spline wikiPageWikiLink Spline_(mechanical).
- Ball_spline wikiPageWikiLinkText "Ball spline".
- Ball_spline wikiPageUsesTemplate Template:Mech-engineering-stub.
- Ball_spline wikiPageUsesTemplate Template:Unreferenced.
- Ball_spline subject Category:Bearings_(mechanical).
- Ball_spline hypernym Type.
- Ball_spline type Bearing.
- Ball_spline comment "Ball splines (Ball Spline bearings) are a special type of linear motion bearing that are used to provide nearly frictionless linear motion while allowing the member to transmit torque simultaneously. There are grooves ground along the length of the shaft (thus forming splines) for the recirculating ground balls to run inside.".
- Ball_spline label "Ball spline".
- Ball_spline sameAs Q4851279.
- Ball_spline sameAs m.02rh6l9.
- Ball_spline sameAs Kulbomsförband.
- Ball_spline sameAs Q4851279.
- Ball_spline wasDerivedFrom Ball_spline?oldid=685262311.
- Ball_spline isPrimaryTopicOf Ball_spline.