Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Allowance_(engineering)> ?p ?o }
Showing triples 1 to 41 of
41
with 100 triples per page.
- Allowance_(engineering) abstract "In engineering and machining, an allowance is a planned deviation between an actual dimension and a nominal or theoretical dimension, or between an intermediate-stage dimension and an intended final dimension. The unifying abstract concept is that a certain amount of difference allows for some known factor of compensation or interference. For example, an area of excess metal may be left because it is needed to complete subsequent machining. Common cases are listed below. An allowance, which is a planned deviation from an ideal, is contrasted with a tolerance, which accounts for expected but unplanned deviations.Allowance is basically the size difference between components that work together. Allowance between parts that are assembled is very important. For example, the axel of a car has to be supported in a bearing otherwise it will fall to the ground. If there was no gap between the axel and the bearing then there would be a lot of friction and it would be difficult to get the car to move. If there was too much of a gap then the axel would be jumping around in the bearing. It is important to get the Allowance between the axel and the bearing correct so that the axel rotates smoothly and easily without judder.".
- Allowance_(engineering) wikiPageID "17464907".
- Allowance_(engineering) wikiPageLength "6071".
- Allowance_(engineering) wikiPageOutDegree "14".
- Allowance_(engineering) wikiPageRevisionID "703254472".
- Allowance_(engineering) wikiPageWikiLink Category:Engineering_concepts.
- Allowance_(engineering) wikiPageWikiLink Engineering.
- Allowance_(engineering) wikiPageWikiLink Engineering_tolerance.
- Allowance_(engineering) wikiPageWikiLink Geometric_dimensioning_and_tolerancing.
- Allowance_(engineering) wikiPageWikiLink Grinding_machine.
- Allowance_(engineering) wikiPageWikiLink Heat_treating.
- Allowance_(engineering) wikiPageWikiLink Interference_fit.
- Allowance_(engineering) wikiPageWikiLink Machining.
- Allowance_(engineering) wikiPageWikiLink Real_versus_nominal_value.
- Allowance_(engineering) wikiPageWikiLink Reamer.
- Allowance_(engineering) wikiPageWikiLink Theory.
- Allowance_(engineering) wikiPageWikiLinkText "Allowance (engineering)".
- Allowance_(engineering) wikiPageWikiLinkText "Allowance (engineering)#Confounding of the engineering concepts of allowance and tolerance".
- Allowance_(engineering) wikiPageWikiLinkText "allowance".
- Allowance_(engineering) wikiPageWikiLinkText "deviate".
- Allowance_(engineering) wikiPageUsesTemplate Template:Convert.
- Allowance_(engineering) wikiPageUsesTemplate Template:Reflist.
- Allowance_(engineering) wikiPageUsesTemplate Template:See_also.
- Allowance_(engineering) wikiPageUsesTemplate Template:Unreferenced.
- Allowance_(engineering) subject Category:Engineering_concepts.
- Allowance_(engineering) hypernym Deviation.
- Allowance_(engineering) type Concept.
- Allowance_(engineering) type Thing.
- Allowance_(engineering) comment "In engineering and machining, an allowance is a planned deviation between an actual dimension and a nominal or theoretical dimension, or between an intermediate-stage dimension and an intended final dimension. The unifying abstract concept is that a certain amount of difference allows for some known factor of compensation or interference. For example, an area of excess metal may be left because it is needed to complete subsequent machining. Common cases are listed below.".
- Allowance_(engineering) label "Allowance (engineering)".
- Allowance_(engineering) seeAlso Engineering_tolerance.
- Allowance_(engineering) sameAs Q3447087.
- Allowance_(engineering) sameAs تسامح_التشغيل.
- Allowance_(engineering) sameAs Dosjed.
- Allowance_(engineering) sameAs m.04f_6z7.
- Allowance_(engineering) sameAs Припуск.
- Allowance_(engineering) sameAs Dosjed.
- Allowance_(engineering) sameAs Припуск.
- Allowance_(engineering) sameAs Q3447087.
- Allowance_(engineering) wasDerivedFrom Allowance_(engineering)?oldid=703254472.
- Allowance_(engineering) isPrimaryTopicOf Allowance_(engineering).