Matches in DBpedia 2016-04 for { ?s <http://dbpedia.org/property/componentsOther> ?o }
Showing triples 1 to 49 of
49
with 100 triples per page.
- Alfa_Romeo_110 componentsOther "Starter: Eclipse inertia starter *Ignition: 2x Marelli SA-4 magnetoes,2x short reach spark plugs per cylinder.".
- Alfa_Romeo_115 componentsOther "Starter: Hand starter *Ignition: 2x Marelli magnetoes, 2x short reach spark plugs per cylinder.".
- Alfa_Romeo_125 componentsOther "Starter: Garelli compressed air starter *Ignition: 2 x Marelli MF9 magnetos, 2 x spark plugs per cylinder, fed by a shielded harness.".
- Alfa_Romeo_135 componentsOther "Starter: Garelli compressed air starter *Ignition: 2x Marelli MF18 magnetoes, 2x long reach spark plugs per cylinder, fed by a shielded harness.".
- Allen_O-675 componentsOther "Ignition system: dual ignition".
- Allison_V-1710 componentsOther "Starter: Jack & Heinz JH-5L electric inertia starter *Ignition: 1 x R.B. Bendix-Scintilla DFLN-5 dual magneto, 2 x 12 point distributors, 2 x spark plugs per cylinder fed by a shielded ignition harness.".
- Alvis_Leonides_Major componentsOther "2".
- Anzani_20 componentsOther "Ignition: two Gilbaud magnetos running at 3,000 rpm; one plug/cylinder".
- Anzani_3-cylinder_fan_engines componentsOther "Ignition: Battery ignition, one spark plug per cylinder".
- Anzani_6-cylinder componentsOther "ignition: single magneto, one plug/cylinder".
- Argus_As_III componentsOther "Twin Bosch ignition magnetos".
- Bristol_Pegasus componentsOther "Propeller: Rotol three-blade with variable pitch".
- Béarn_6 componentsOther "Starter: Air Equipment 51020 electric inertia starter *Ignition: 2 x R.B. GPBA magnetos, 2 x spark plugs per cylinder fed by a shielded ignition harness.".
- CNA_C-7 componentsOther "Ignition: Dual ignition: 2× Marelli plugs per cylinder, driven by a different Marelli magneto".
- Carden-Ford componentsOther "Dual magnetos".
- Cisco_Snap_100 componentsOther "Starting system Manual 'pull cord' starting system".
- Daiichi_Kosho_DK_472 componentsOther "Electric start".
- Fiat_A.22 componentsOther "* Cylinders: Forged steel barrels, with closed, flat ends. * Pistons: Aluminium alloy, two compression rings and one scraper ring above a fully floating gudgeon pin, with a second scraper ring below it. * Crankshaft: Each six throw, seven bearings. * Crankcase: Each an aluminium casting, split on crankshaft centre line. Bolted-on duralumin end caps.".
- Fiat_A.24 componentsOther "Cylinders: Forged steel barrels, with closed, flat ends. * Pistons: Aluminium alloy, two compression rings and two scraper rings above fully floating gudgeon pin. * Crankshaft: Each six throw, seven bearings. * Crankcase: Each an aluminium casting, split below crankshaft centre line. Bolted-on duralumin end caps.".
- Fiat_A.25 componentsOther "Cylinders: Forged steel barrels, with closed, flat ends. * Pistons: Aluminium alloy, two compression rings and one scraper ring above a fully floating gudgeon pin, with a second scraper ring below it. * Crankshaft: Each six throw, seven bearings. * Crankcase: Each an aluminium casting, split on crankshaft centre line. Bolted-on duralumin end caps.".
- Fiat_A.30 componentsOther "Cylinders: Forged steel barrels, with closed, flat ends. * Pistons: Aluminium alloy, two compression rings and one scraper ring above a fully floating gudgeon pin, with a second scraper ring below it. * Crankshaft: Each six throw, seven bearings. * Crankcase: Each an aluminium casting, split on crankshaft centre line. Bolted-on duralumin end caps.".
- Fiat_AN.1 componentsOther "Cylinders: Steel barrels with two inlet and two exhaust valves formed in each cylinder head and with a central seating for the fuel injector. Water jackets and valve chambers welded on. * Pistons: Aluminium, with shaped heads to provide optimum compression ignition.".
- Firewall_Forward_CAM_100 componentsOther "Starting system Electric gear reduction starter.".
- Firewall_Forward_CAM_125 componentsOther "Starting system Electric gear reduction starter.".
- Franklin_6_series componentsOther "Delco-Remy 108567-541 vertical geared electric starter motor".
- Franklin_O-335 componentsOther "Delco-Remy direct cranking electric starter motor".
- Gnome-Rhône_14M componentsOther "Air Equipment 47 electric inertia starter".
- Green_D.4 componentsOther "Ignition: Single Bosch magneto".
- Hispano-Suiza_12Z componentsOther "Air Equipment 1525 compressed gas starting system".
- Isotta_Fraschini_Asso_XI componentsOther "Compressed air starter".
- Junkers_L1 componentsOther "Ignition system: twin magnetos and two sparking plugs per cylinder".
- Lorraine_12F_Courlis componentsOther "Construction: Steel cylinder in aluminium block; aluminium cylinder head; aluminium pistons; 5 bearing crankshaft".
- Lycoming_O-1230 componentsOther "separate cylinders * hemispheric cylinder head design * one-piece cylinder head for each bank".
- Menasco_Unitwin_2-544 componentsOther "4".
- Napier_Culverin componentsOther "Starting system: Compressed air starter".
- Piaggio_P.XI componentsOther "Starter: Garelli compressed air starter * Ignition: 2 x Marelli MF14 magnetos, 2 x spark plugs per cylinder fed by a shielded ignition harness.".
- Piaggio_P.XII componentsOther "Starter: Garelli compressed air starter *Ignition: 2x Marelli AQ18 magnetos, 2 x spark plugs per cylinder fed by a shielded ignition harness.".
- Potez_4E componentsOther "12".
- Potez_6D componentsOther "Pistons, connecting rods and crankshaft: Y-alloy pistons with two compression and two scraper rings. I-section forged aluminium alloy connecting rods, with split big-ends and lead -bronze bearings. Six throw, forged nitrided Ni-Cr-Mo steel crankshaft. Ball thrust bearing and seven lead-bronze plated bearings. Cast aluminium-alloy crankcase.".
- Potez_8D componentsOther "Pistons, connecting rods and crankshaft: Y-alloy pistons with two compression and two scraper rings. Fork and blade type nitrided Ni-Cr-Mo steel connecting rods, with split big-ends and lead -bronze bearings. Four throw, forged nitrided Ni-Cr-Mo steel balanced crankshaft, its rear end driving the supercharger via flexible drive. Five lead-bronze plated bearings. Cast aluminium-alloy crankcase.".
- Renault_438 componentsOther "Two-blded, two-position variable-pitch Ratier propeller.".
- Renault_6Q componentsOther "Cylinders: Steel barrels with machined fins aluminium heads with cast fins and hemispherical combustion chamber. * Pistons: Aluminium alloy forged with four piston rings and floating gudgeon pins. Duralumin connecting rods with white metal big-end bearings and bronze little-end bushes. * Crankshaft: Forged steel with six throws and seven bearings. * Crankcase: Aluminium, with magnesium cover and main bearing in crankcase extension.".
- Revmaster_R-2100D componentsOther "Tillotson Floatless Carburetor".
- Rotax_914 componentsOther "Electronic dual ignition".
- SNECMA_14R componentsOther "Starter: Air equipment electric inertia starter * Ignition: 2 x R.B. magnetos, 2 x short reach spark plugs per cylinder fed by a shielded ignition harness.".
- SPA_6A componentsOther "Twin Marelli ignition magnetos".
- Sunbeam_Sikh componentsOther "2".
- Train_T componentsOther "Cylinders: Machined steel barrels with aluminium-bronze heads containing machined valve seat and secured with long bolts to crankcase. ;Pistons: Aluminium alloy. Floating gudgeon pins. Three compression and one scraper ring/cylinder ;Connecting rods:Forged duralumin with split big ends. ;Crankshaft:4-throw steel casting with 5 white metal lined bearings. Front ball race thrust bearing. ;Crankcase:Aluminium casting in top and bottom halves, with capped crankshaft bearings in the lower part.".
- Walter_Mikron componentsOther "Starter: 1x Walter mecano 4 hand starter".