Matches in DBpedia 2016-04 for { ?s ?p "The .222 Rimmed is a centrefire rifle cartridge, originating in Australia in the 1960s as a cartridge for single shot rifles, particularly the Martini Cadet action. Performance is similar to the .222 Remington on which it is based however loads should be reduced as the walls of the brass cases are generally thicker.Extraction of cases that have been loaded to higher pressures can be difficult due to the inefficient extraction method utilised by the Martini Cadet.Cases and loaded rounds were originally produced by the Super Cartridge Company. Brass is now available from the Bertram Bullet Company or can be made from 5.6x50mmR RWS cases.The .222 Rimmed has also been used as a parent case for wildcats, similar to ones based on the .222 Remington, such as rimmed versions of the .17 Mach IV, the .17-222, and the .20 VarTarg."@en }
Showing triples 1 to 2 of
2
with 100 triples per page.
- .222_Rimmed abstract "The .222 Rimmed is a centrefire rifle cartridge, originating in Australia in the 1960s as a cartridge for single shot rifles, particularly the Martini Cadet action. Performance is similar to the .222 Remington on which it is based however loads should be reduced as the walls of the brass cases are generally thicker.Extraction of cases that have been loaded to higher pressures can be difficult due to the inefficient extraction method utilised by the Martini Cadet.Cases and loaded rounds were originally produced by the Super Cartridge Company. Brass is now available from the Bertram Bullet Company or can be made from 5.6x50mmR RWS cases.The .222 Rimmed has also been used as a parent case for wildcats, similar to ones based on the .222 Remington, such as rimmed versions of the .17 Mach IV, the .17-222, and the .20 VarTarg.".
- Q4545184 abstract "The .222 Rimmed is a centrefire rifle cartridge, originating in Australia in the 1960s as a cartridge for single shot rifles, particularly the Martini Cadet action. Performance is similar to the .222 Remington on which it is based however loads should be reduced as the walls of the brass cases are generally thicker.Extraction of cases that have been loaded to higher pressures can be difficult due to the inefficient extraction method utilised by the Martini Cadet.Cases and loaded rounds were originally produced by the Super Cartridge Company. Brass is now available from the Bertram Bullet Company or can be made from 5.6x50mmR RWS cases.The .222 Rimmed has also been used as a parent case for wildcats, similar to ones based on the .222 Remington, such as rimmed versions of the .17 Mach IV, the .17-222, and the .20 VarTarg.".