Matches in DBpedia 2015-10 for { <http://dbpedia.org/resource/Pressure_angle> ?p ?o }
Showing triples 1 to 31 of
31
with 100 triples per page.
- Pressure_angle abstract "Pressure angle in relation to gear teeth, also known as the angle of obliquity, is the angle between the tooth face and the gear wheel tangent. It is more precisely the angle at a pitch point between the line of pressure (which is normal to the tooth surface) and the plane tangent to the pitch surface. The pressure angle gives the direction normal to the tooth profile. The pressure angle is equal to the profile angle at the standard pitch circle and can be termed the "standard" pressure angle at that point. Standard values are 14.5, 20 and 25 degrees. Earlier gears with pressure angle 14.5 were commonly used because the cosine is larger for a smaller angle, providing more power transmission and less pressure on the bearing; however, teeth with smaller pressure angles are weaker. To run gears together properly their pressure angles must be matched.The pressure angle is also the angle of the sides of the trapezoidal teeth on the corresponding rack.Just as there are three types of profile angle, there are three types of corresponding pressure angle: the transverse pressure angle, the normal pressure angle, and the axial pressure angle.".
- Pressure_angle thumbnail Pressure_profile.jpg?width=300.
- Pressure_angle wikiPageID "12564556".
- Pressure_angle wikiPageLength "1842".
- Pressure_angle wikiPageOutDegree "7".
- Pressure_angle wikiPageRevisionID "643002059".
- Pressure_angle wikiPageWikiLink Category:Gears.
- Pressure_angle wikiPageWikiLink Gear.
- Pressure_angle wikiPageWikiLink Involute_gear.
- Pressure_angle wikiPageWikiLink List_of_gear_nomenclature.
- Pressure_angle wikiPageWikiLink Profile_angle.
- Pressure_angle wikiPageWikiLink File:Pressure_profile.jpg.
- Pressure_angle wikiPageWikiLinkText "Pressure angle".
- Pressure_angle wikiPageWikiLinkText "pressure angle".
- Pressure_angle hasPhotoCollection Pressure_angle.
- Pressure_angle wikiPageUsesTemplate Template:Mech-engineering-stub.
- Pressure_angle wikiPageUsesTemplate Template:Reflist.
- Pressure_angle subject Category:Gears.
- Pressure_angle hypernym Angle.
- Pressure_angle type AnatomicalStructure.
- Pressure_angle type Article.
- Pressure_angle type Article.
- Pressure_angle type Gear.
- Pressure_angle comment "Pressure angle in relation to gear teeth, also known as the angle of obliquity, is the angle between the tooth face and the gear wheel tangent. It is more precisely the angle at a pitch point between the line of pressure (which is normal to the tooth surface) and the plane tangent to the pitch surface. The pressure angle gives the direction normal to the tooth profile.".
- Pressure_angle label "Pressure angle".
- Pressure_angle sameAs m.02ww11h.
- Pressure_angle sameAs Q7241712.
- Pressure_angle sameAs Q7241712.
- Pressure_angle wasDerivedFrom Pressure_angle?oldid=643002059.
- Pressure_angle depiction Pressure_profile.jpg.
- Pressure_angle isPrimaryTopicOf Pressure_angle.