Matches in DBpedia 2015-10 for { <http://dbpedia.org/resource/Feeler_gauge> ?p ?o }
Showing triples 1 to 57 of
57
with 100 triples per page.
- Feeler_gauge abstract "A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts.They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values. It is common to have two sets for imperial units (typically measured in thousandths of an inch) and metric (typically measured in hundredths of a millimetre) measurements.A similar device with wires of specific diameter instead of flat blades is used to set the gap in spark plugs to the correct size; this is done by increasing or decreasing the gap until the gauge of the correct size just fits inside the gap.The lengths of steel are sometimes called leaves or blades, although they have no sharp edge.".
- Feeler_gauge thumbnail Feeler_gauge.jpg?width=300.
- Feeler_gauge wikiPageID "1355101".
- Feeler_gauge wikiPageLength "1993".
- Feeler_gauge wikiPageOutDegree "12".
- Feeler_gauge wikiPageRevisionID "632264334".
- Feeler_gauge wikiPageWikiLink Category:Length,_distance,_or_range_measuring_devices.
- Feeler_gauge wikiPageWikiLink Category:Metalworking_measuring_instruments.
- Feeler_gauge wikiPageWikiLink Engineering.
- Feeler_gauge wikiPageWikiLink Imperial_unit.
- Feeler_gauge wikiPageWikiLink Imperial_units.
- Feeler_gauge wikiPageWikiLink Metric_system.
- Feeler_gauge wikiPageWikiLink Millimetre.
- Feeler_gauge wikiPageWikiLink Plastigauge.
- Feeler_gauge wikiPageWikiLink Spark_plug.
- Feeler_gauge wikiPageWikiLink Spark_plugs.
- Feeler_gauge wikiPageWikiLink Thou_(length).
- Feeler_gauge wikiPageWikiLink Thousandth_of_an_inch.
- Feeler_gauge wikiPageWikiLink Tool.
- Feeler_gauge wikiPageWikiLink File:Feeler_gauge.jpg.
- Feeler_gauge wikiPageWikiLink File:Feelers.svg.
- Feeler_gauge wikiPageWikiLinkText "Feeler gauge".
- Feeler_gauge wikiPageWikiLinkText "feeler gauge".
- Feeler_gauge hasPhotoCollection Feeler_gauge.
- Feeler_gauge wikiPageUsesTemplate Template:Commons_category.
- Feeler_gauge wikiPageUsesTemplate Template:Metalworking_navbox.
- Feeler_gauge wikiPageUsesTemplate Template:Reflist.
- Feeler_gauge subject Category:Length,_distance,_or_range_measuring_devices.
- Feeler_gauge subject Category:Metalworking_measuring_instruments.
- Feeler_gauge hypernym Tool.
- Feeler_gauge type Instrument.
- Feeler_gauge type Software.
- Feeler_gauge type Instrument.
- Feeler_gauge type Tool.
- Feeler_gauge comment "A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts.They consist of a number of small lengths of steel of different thicknesses with measurements marked on each piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values.".
- Feeler_gauge label "Feeler gauge".
- Feeler_gauge sameAs Spárové_měrky.
- Feeler_gauge sameAs Fühlerlehre.
- Feeler_gauge sameAs Calibre_fijo.
- Feeler_gauge sameAs Lehtkaliiber.
- Feeler_gauge sameAs Jauge_dxc3xa9paisseur.
- Feeler_gauge sameAs Mjerni_listići.
- Feeler_gauge sameAs Spessimetro.
- Feeler_gauge sameAs すきまゲージ.
- Feeler_gauge sameAs Voelermaat.
- Feeler_gauge sameAs Føler.
- Feeler_gauge sameAs Szczelinomierz.
- Feeler_gauge sameAs m.04w7v3.
- Feeler_gauge sameAs Mjerni_listići.
- Feeler_gauge sameAs Bladmått.
- Feeler_gauge sameAs Sentil.
- Feeler_gauge sameAs Q1143184.
- Feeler_gauge sameAs Q1143184.
- Feeler_gauge sameAs 厚薄規.
- Feeler_gauge wasDerivedFrom Feeler_gauge?oldid=632264334.
- Feeler_gauge depiction Feeler_gauge.jpg.
- Feeler_gauge isPrimaryTopicOf Feeler_gauge.