Matches in DBpedia 2015-10 for { <http://dbpedia.org/resource/Bede_Wing> ?p ?o }
Showing triples 1 to 64 of
64
with 100 triples per page.
- Bede_Wing abstract "The Bede Wing was an inflated hang glider, designed in the 1970s by aeronautical engineer Jim Bede. Intended as a safer alternative to conventional hang gliders, it resembled an early ram-air parachute, but instead was an inflatable structure, that could be filled with air for gliding, or with helium to act as a gas balloon.The aspect ratio of the Bede Wing was low, in the area of 1.8. Fitted with unusually long suspension lines, the Bede Wing had almost no dihedral. It was also reported to have a lower sink rate than conventional hang gliders of the time.Although Bede intended to start full production of the Bede Wing, the project came to naught. However, it foreshadowed the introduction of ram-air inflated paragliders in the mid-1980s.".
- Bede_Wing designer Jim_Bede.
- Bede_Wing manufacturer Bede_Aircraft.
- Bede_Wing unitCost "890.0".
- Bede_Wing wikiPageID "17325258".
- Bede_Wing wikiPageLength "2545".
- Bede_Wing wikiPageOutDegree "19".
- Bede_Wing wikiPageRevisionID "559558768".
- Bede_Wing wikiPageWikiLink Aspect_ratio.
- Bede_Wing wikiPageWikiLink Bede_Aircraft.
- Bede_Wing wikiPageWikiLink Category:Balloons_(aircraft).
- Bede_Wing wikiPageWikiLink Category:Bede_aircraft.
- Bede_Wing wikiPageWikiLink Category:Hang_gliders.
- Bede_Wing wikiPageWikiLink Category:Inflatable_aircraft.
- Bede_Wing wikiPageWikiLink Category:Parafoils.
- Bede_Wing wikiPageWikiLink Dihedral_(aeronautics).
- Bede_Wing wikiPageWikiLink Dihedral_(aircraft).
- Bede_Wing wikiPageWikiLink Gas_balloon.
- Bede_Wing wikiPageWikiLink Hang_gliding.
- Bede_Wing wikiPageWikiLink Helium.
- Bede_Wing wikiPageWikiLink Inflatable.
- Bede_Wing wikiPageWikiLink Inflatable_structure.
- Bede_Wing wikiPageWikiLink Jim_Bede.
- Bede_Wing wikiPageWikiLink Parachute.
- Bede_Wing wikiPageWikiLink Paragliding.
- Bede_Wing wikiPageWikiLink Powered_parachute.
- Bede_Wing wikiPageWikiLink Ram-air_intake.
- Bede_Wing wikiPageWikiLink Rate_of_climb.
- Bede_Wing wikiPageWikiLink Sink_rate.
- Bede_Wing wikiPageWikiLinkText "Bede Wing".
- Bede_Wing designer Jim_Bede.
- Bede_Wing hasPhotoCollection Bede_Wing.
- Bede_Wing manufacturer Bede_Aircraft.
- Bede_Wing seeAlso "* Powered parachute".
- Bede_Wing type "Inflatable hang-glider".
- Bede_Wing unitCost "890.0".
- Bede_Wing wikiPageUsesTemplate Template:Aircontent.
- Bede_Wing wikiPageUsesTemplate Template:Bede_aircraft.
- Bede_Wing wikiPageUsesTemplate Template:Citation_needed.
- Bede_Wing wikiPageUsesTemplate Template:Infobox_Aircraft_Type.
- Bede_Wing wikiPageUsesTemplate Template:Portal.
- Bede_Wing wikiPageUsesTemplate Template:Reflist.
- Bede_Wing subject Category:Balloons_(aircraft).
- Bede_Wing subject Category:Bede_aircraft.
- Bede_Wing subject Category:Hang_gliders.
- Bede_Wing subject Category:Inflatable_aircraft.
- Bede_Wing subject Category:Parafoils.
- Bede_Wing type Aircraft.
- Bede_Wing type Article.
- Bede_Wing type MeanOfTransportation.
- Bede_Wing type Aeronautic.
- Bede_Wing type Article.
- Bede_Wing type Configuration.
- Bede_Wing type Product.
- Bede_Wing type DesignedArtifact.
- Bede_Wing type Thing.
- Bede_Wing type Q11436.
- Bede_Wing comment "The Bede Wing was an inflated hang glider, designed in the 1970s by aeronautical engineer Jim Bede. Intended as a safer alternative to conventional hang gliders, it resembled an early ram-air parachute, but instead was an inflatable structure, that could be filled with air for gliding, or with helium to act as a gas balloon.The aspect ratio of the Bede Wing was low, in the area of 1.8. Fitted with unusually long suspension lines, the Bede Wing had almost no dihedral.".
- Bede_Wing label "Bede Wing".
- Bede_Wing sameAs m.043rhg_.
- Bede_Wing sameAs Q4879043.
- Bede_Wing sameAs Q4879043.
- Bede_Wing wasDerivedFrom Bede_Wing?oldid=559558768.
- Bede_Wing isPrimaryTopicOf Bede_Wing.