Matches in DBpedia 2015-10 for { <http://dbpedia.org/resource/ANSI/ASME_Y14.1> ?p ?o }
Showing triples 1 to 30 of
30
with 100 triples per page.
- ASME_Y14.1 abstract "In 1995, the American National Standards Institute adopted ANSI/ASME Y14.1 which defined a regular series of paper sizes based upon the de facto standard 8½ in × 11 in "letter" size which it assigned "ANSI A". This series also includes "ledger"/"tabloid" as "ANSI B". This series is somewhat similar to the ISO 216 standard in that cutting a sheet in half would produce two sheets of the next smaller size. Unlike the ISO standard, however, the arbitrary aspect ratio forces this series to have two alternating aspect ratios. The ANSI series is shown below.With care, documents can be prepared so that the text and images fit on either ANSI or their equivalent ISO sheets at 1:1 reproduction scale.Other, larger sizes continuing the alphabetic series illustrated above exist, but they are not part of the series per se, because they do not exhibit the same aspect ratios. For example, Engineering F size (28 in × 40 in, 711.2 mm × 1016.0 mm) also exists, but is rarely encountered, as are G, H, … N size drawings. G size is 22½ in (571.5 mm) high, but variable width up to 90 in (2286 mm) in increments of 8½ in, i.e., roll format. H and larger letter sizes are also roll formats. Such sheets were at one time used for full-scale layouts of aircraft parts, wiring harnesses and the like, but today are generally not needed, due to widespread use of computer-aided design (CAD) and computer-aided manufacturing (CAM).".
- ASME_Y14.1 thumbnail ANSI_size_illustration.svg?width=300.
- ASME_Y14.1 wikiPageID "20039906".
- ASME_Y14.1 wikiPageLength "2526".
- ASME_Y14.1 wikiPageOutDegree "7".
- ASME_Y14.1 wikiPageRevisionID "677078119".
- ASME_Y14.1 wikiPageWikiLink American_National_Standards_Institute.
- ASME_Y14.1 wikiPageWikiLink Category:ANSI_standards.
- ASME_Y14.1 wikiPageWikiLink Category:Stationery.
- ASME_Y14.1 wikiPageWikiLink Computer-aided_design.
- ASME_Y14.1 wikiPageWikiLink Computer-aided_manufacturing.
- ASME_Y14.1 wikiPageWikiLink ISO_216.
- ASME_Y14.1 wikiPageWikiLink File:ANSI_size_illustration.svg.
- ASME_Y14.1 wikiPageWikiLinkText "ANSI/ASME Y14.1".
- ASME_Y14.1 hasPhotoCollection ASME_Y14.1.
- ASME_Y14.1 wikiPageUsesTemplate Template:Measurement-stub.
- ASME_Y14.1 wikiPageUsesTemplate Template:Refimprove.
- ASME_Y14.1 wikiPageUsesTemplate Template:Reflist.
- ASME_Y14.1 subject Category:ANSI_standards.
- ASME_Y14.1 subject Category:Stationery.
- ASME_Y14.1 type Article.
- ASME_Y14.1 type Article.
- ASME_Y14.1 comment "In 1995, the American National Standards Institute adopted ANSI/ASME Y14.1 which defined a regular series of paper sizes based upon the de facto standard 8½ in × 11 in "letter" size which it assigned "ANSI A". This series also includes "ledger"/"tabloid" as "ANSI B". This series is somewhat similar to the ISO 216 standard in that cutting a sheet in half would produce two sheets of the next smaller size.".
- ASME_Y14.1 label "ANSI/ASME Y14.1".
- ASME_Y14.1 sameAs m.04yb1ll.
- ASME_Y14.1 sameAs Q4653029.
- ASME_Y14.1 sameAs Q4653029.
- ASME_Y14.1 wasDerivedFrom ASME_Y14.1?oldid=677078119.
- ASME_Y14.1 depiction ANSI_size_illustration.svg.
- ASME_Y14.1 isPrimaryTopicOf ASME_Y14.1.