Matches in DBpedia 2014 for { <http://dbpedia.org/resource/AN_thread> ?p ?o }
Showing triples 1 to 27 of
27
with 100 triples per page.
- AN_thread abstract "The AN thread is a particular type of fitting used to connect flexible hoses and rigid metal tubing that carry fluid. It is a US military-derived specification that dates back to World War II and stems from a joint standard agreed upon by the Army and Navy, hence AN. AN sizes range from -2 (dash two) to -32 in irregular steps, with each step equating to the OD (outside diameter) of the tubing in 1/16" increments. Therefore, a -8 AN size would be equal to 1/2" OD tube (8 x 1/16 = 1/2). However, this system does not specify the ID (inside diameter) of the tubing because the tube wall can vary in thickness. Each AN size also uses its own standard thread size.AN fittings are a flare fitting, using 37° flared tubing to form a metal-metal seal. They are similar to other 37° flared fittings, such as JIC, which is their industrial variant. The two are interchangeable in theory, though this is typically not recommended due to the exacting specifications and demands of the aerospace industry. The differences between them relate to thread class and shape (how tight a fit the threads are), and the metals used.Note that 37° AN and 45° SAE fittings and tooling are not interchangeable due to the different flaring angles. Mixing them can cause leakage at the flare.Originally controlled by the specification MS33656, but is now controlled by SAE-AS4395.".
- AN_thread thumbnail ANfitting.jpg?width=300.
- AN_thread wikiPageExternalLink an-vs-npt.
- AN_thread wikiPageExternalLink books?id=S0sNFyNwPBYC&pg=PA183.
- AN_thread wikiPageExternalLink AEROCOM%20Aerospace%20Fluid%20Connectors.pdf.
- AN_thread wikiPageExternalLink articleStronger.html.
- AN_thread wikiPageID "863608".
- AN_thread wikiPageRevisionID "580200410".
- AN_thread hasPhotoCollection AN_thread.
- AN_thread subject Category:Mechanical_standards.
- AN_thread subject Category:Piping.
- AN_thread subject Category:Plumbing.
- AN_thread subject Category:Threading_(manufacturing).
- AN_thread type Abstraction100002137.
- AN_thread type Measure100033615.
- AN_thread type MechanicalStandards.
- AN_thread type Standard107260623.
- AN_thread type SystemOfMeasurement113577171.
- AN_thread comment "The AN thread is a particular type of fitting used to connect flexible hoses and rigid metal tubing that carry fluid. It is a US military-derived specification that dates back to World War II and stems from a joint standard agreed upon by the Army and Navy, hence AN. AN sizes range from -2 (dash two) to -32 in irregular steps, with each step equating to the OD (outside diameter) of the tubing in 1/16" increments. Therefore, a -8 AN size would be equal to 1/2" OD tube (8 x 1/16 = 1/2).".
- AN_thread label "AN thread".
- AN_thread sameAs m.03jhqf.
- AN_thread sameAs Q4653114.
- AN_thread sameAs Q4653114.
- AN_thread sameAs AN_thread.
- AN_thread wasDerivedFrom AN_thread?oldid=580200410.
- AN_thread depiction ANfitting.jpg.
- AN_thread isPrimaryTopicOf AN_thread.