Matches in DBpedia 2016-04 for { <http://dbpedia.org/resource/Hold_down_(structural_engineering)> ?p ?o }
Showing triples 1 to 26 of
26
with 100 triples per page.
- Hold_down_(structural_engineering) abstract "Holdown (hold-down, hold down) or tie-down in structural engineering refers to the steel device or hardware that is installed at the end of a plywood shear wall. The holdowns provide uplift resistance against the overturning moment imposed on the wall due to \"in-plane\" lateral load applied at the top of the wall. A hold-down may also refer to clamping device used to anchor a pipe to a structural steel element or concrete floor or allow movement of the pipe in an axial direction.At the bottom, the holdown is connected to the concrete foundation or structural slab by an embedded or epoxied anchor bolt. At the top, the holdown is connected to a wood post with screws, nails or bolts.".
- Hold_down_(structural_engineering) thumbnail HoldDown.JPG?width=300.
- Hold_down_(structural_engineering) wikiPageID "3549391".
- Hold_down_(structural_engineering) wikiPageLength "1194".
- Hold_down_(structural_engineering) wikiPageOutDegree "6".
- Hold_down_(structural_engineering) wikiPageRevisionID "532080639".
- Hold_down_(structural_engineering) wikiPageWikiLink Anchor_bolt.
- Hold_down_(structural_engineering) wikiPageWikiLink Category:Structural_connectors.
- Hold_down_(structural_engineering) wikiPageWikiLink File:Hold_Down_Clamp.jpg.
- Hold_down_(structural_engineering) wikiPageWikiLink Shear_wall.
- Hold_down_(structural_engineering) wikiPageWikiLink Structural_engineering.
- Hold_down_(structural_engineering) wikiPageWikiLink File:HoldDown.JPG.
- Hold_down_(structural_engineering) wikiPageWikiLinkText "Hold down".
- Hold_down_(structural_engineering) wikiPageWikiLinkText "hold down".
- Hold_down_(structural_engineering) wikiPageUsesTemplate Template:Refimprove.
- Hold_down_(structural_engineering) wikiPageUsesTemplate Template:Reflist.
- Hold_down_(structural_engineering) subject Category:Structural_connectors.
- Hold_down_(structural_engineering) type Connector.
- Hold_down_(structural_engineering) comment "Holdown (hold-down, hold down) or tie-down in structural engineering refers to the steel device or hardware that is installed at the end of a plywood shear wall. The holdowns provide uplift resistance against the overturning moment imposed on the wall due to \"in-plane\" lateral load applied at the top of the wall.".
- Hold_down_(structural_engineering) label "Hold down (structural engineering)".
- Hold_down_(structural_engineering) sameAs Q5879362.
- Hold_down_(structural_engineering) sameAs m.09kxms.
- Hold_down_(structural_engineering) sameAs Q5879362.
- Hold_down_(structural_engineering) wasDerivedFrom Hold_down_(structural_engineering)?oldid=532080639.
- Hold_down_(structural_engineering) depiction HoldDown.JPG.
- Hold_down_(structural_engineering) isPrimaryTopicOf Hold_down_(structural_engineering).