Matches in DBpedia 2016-04 for { ?s ?p "A district heating substation is a component in a district heating system that connects the main network to a building's own heating system.The station normally has one, or more of the following parts: Heat exchanger - to split primary and secondary side of the system Control valve - to regulate the flow through the heat exchanger Differential pressure controller - to balance the network and improve working conditions of control valve Strainer - to remove particles that could block heat exchanger or control valve Shut off valve - to stop the flow on primary side in case of service or emergency Heat meter - to measure energy consumption and allocate costs Temperature controller - to control temperature on secondary side by regulating the flow on primary side Temperature sensor - to sense flow and return temperatures required for temperature control In addition, a district heating substation may also include: Pump Safety valve Manometer Non-return valve↑ ↑ ↑"@en }
Showing triples 1 to 4 of
4
with 100 triples per page.
- District_heating_substation abstract "A district heating substation is a component in a district heating system that connects the main network to a building's own heating system.The station normally has one, or more of the following parts: Heat exchanger - to split primary and secondary side of the system Control valve - to regulate the flow through the heat exchanger Differential pressure controller - to balance the network and improve working conditions of control valve Strainer - to remove particles that could block heat exchanger or control valve Shut off valve - to stop the flow on primary side in case of service or emergency Heat meter - to measure energy consumption and allocate costs Temperature controller - to control temperature on secondary side by regulating the flow on primary side Temperature sensor - to sense flow and return temperatures required for temperature control In addition, a district heating substation may also include: Pump Safety valve Manometer Non-return valve↑ ↑ ↑".
- Q1577453 abstract "A district heating substation is a component in a district heating system that connects the main network to a building's own heating system.The station normally has one, or more of the following parts: Heat exchanger - to split primary and secondary side of the system Control valve - to regulate the flow through the heat exchanger Differential pressure controller - to balance the network and improve working conditions of control valve Strainer - to remove particles that could block heat exchanger or control valve Shut off valve - to stop the flow on primary side in case of service or emergency Heat meter - to measure energy consumption and allocate costs Temperature controller - to control temperature on secondary side by regulating the flow on primary side Temperature sensor - to sense flow and return temperatures required for temperature control In addition, a district heating substation may also include: Pump Safety valve Manometer Non-return valve↑ ↑ ↑".
- District_heating_substation comment "A district heating substation is a component in a district heating system that connects the main network to a building's own heating system.The station normally has one, or more of the following parts: Heat exchanger - to split primary and secondary side of the system Control valve - to regulate the flow through the heat exchanger Differential pressure controller - to balance the network and improve working conditions of control valve Strainer - to remove particles that could block heat exchanger or control valve Shut off valve - to stop the flow on primary side in case of service or emergency Heat meter - to measure energy consumption and allocate costs Temperature controller - to control temperature on secondary side by regulating the flow on primary side Temperature sensor - to sense flow and return temperatures required for temperature control In addition, a district heating substation may also include: Pump Safety valve Manometer Non-return valve↑ ↑ ↑".
- Q1577453 comment "A district heating substation is a component in a district heating system that connects the main network to a building's own heating system.The station normally has one, or more of the following parts: Heat exchanger - to split primary and secondary side of the system Control valve - to regulate the flow through the heat exchanger Differential pressure controller - to balance the network and improve working conditions of control valve Strainer - to remove particles that could block heat exchanger or control valve Shut off valve - to stop the flow on primary side in case of service or emergency Heat meter - to measure energy consumption and allocate costs Temperature controller - to control temperature on secondary side by regulating the flow on primary side Temperature sensor - to sense flow and return temperatures required for temperature control In addition, a district heating substation may also include: Pump Safety valve Manometer Non-return valve↑ ↑ ↑".